With the tubular motor automation set basic from RADEMACHER, roller shutters are easily motorized. Installation material and instructions included. No annoying searching for individual parts, no missing material on site, simply complete! Buy, unpack, install and done. And that for the most common window widths up to 185 cm. The mechanical tubular motor automation set basic includes the tubular motor tubular motor basic medium 20 Nm / 16 rpm (RTBM 20/16) including the following accessories: adapter, driver, click drive bearing, aluminum bearing, octagonal steel shaft (60 mm x 0.6 m), telescopic extension including roller capsule, 4 fastening springs, counter bearing including ball bearing, installation material and installation instructions. The torque of the motor is 20 Nm and the speed is 16 rpm.
| Property | Value |
| Torque: | 20 Nm |
| Outer diameter: | 60 mm |
| Octagonal steel shaft SW 40: | no |
| Octagonal steel shaft SW 50: | yes |
| Octagonal steel shaft SW 60: | yes |
| Octagonal steel shaft SW 70: | yes |
| For roller shutters: | yes |
| For awnings: | yes |
| For grooved tube shaft: | yes |
| Type of limit switch: | mechanical |
| Backjump: | no |
| Electronic path monitoring: | no |
| Electronic obstacle detection: | no |
| With driver: | yes |
| With adapter for shaft: | yes |
| Length: | 474 mm |
| Max. roller shutter weight: | 49 kg |
