Catalog

Runpotec 10202 RP5 cable pulling tool including digital meter counter pipe diameter 16 - 40 mm

In stock
SKU: 1027407
€189.35
Into a basketIn the basketGo

Overview

Advantages
Integrated digital meter counter
270 kg total breaking load
2 x RG7 - guide tip with twist compensation Ø 7 mm
Push-back protection
3-fold twisted special plastic band Ø 5.5 mm
50% less frictional resistance
Virtually break-free, even with the tightest radii

Description
The RP5 - RUNPOTEC Polyester Ø 5.5 mm is a cable pulling tool including a digital meter counter (for determining the length of pipes/cables or for creating cable lists). The 3-fold twisted special plastic band Ø 5.5 mm has an even better pushing effect than the glass fiber rod Ø 3 mm and the frictional resistance is only half as great due to its point-based support. The patented RG7 guide tip with twist compensation Ø 5.5 mm (pressed at the beginning and end of the tape) enables the tightest radii to be overcome (bending radius 15 mm). The RP5 - RUNPOTEC Polyester Ø 5.5 mm is stored in a robust storage box with an ergonomic handle that is suitable for construction sites. This is equipped with the new push-back safety device that prevents the cable pulling tape from accidentally slipping back. The unit of measurement of the meter counter can be changed from metric (m) to imperial (ft). The total breaking load of an incredible 270 kg refers to the entire pulling system. Labor- and time-consuming repair work is eliminated because this cable pulling system is almost break-free. The RP5 is available in lengths of 20 m and 30 m. The RP5 replacement tape 40 m cannot be stored in the box.
Optimal area of application: for pipes with a diameter of 16 mm - 40 mm.
Application video: you can watch a short, very informative application video by scanning the QR code or at www.runpotec.com

Technical data
Length: 20 m
Bending radius: 15
Total breaking load: 270 kg
Recommended pipe diameter: 16-40 mm
Other properties: incl. meter counter
EAN code: 9120045477573

Scope of delivery:
Scope of delivery: 1 x RP5 cable pulling system Ø 5.5 mm incl. meter counter in plastic box, length 20 m, incl. 2 x RG7 - guide tip with twist compensation (pressed on both sides)

Characteristics

HABRP5 incl. digi.MTRZ.20m for pipe D:16-40mm
ManufacturerRunpotec
HAN10202
GTIN9120045477573
Runpotec 10202 RP5 cable pulling tool including digital meter counter pipe diameter 16 - 40 mm
Runpotec 10202 RP5 cable pulling tool including digital meter counter pipe diameter 16 - 40 mm
€189.35
Into a basketIn the basketGo
Delivery in Europe
We will deliver your order to all European cities.
In cash, by bank card or online
We are located
8200-121 Albufeira.R. Dr. Diogo Leote 35.
24 hours
We will send the order within 24 hours.
HomeCatalogSearchProfile0Cart