Hager EE804A 360° surface-mounted motion detector

In stock

SKU: 410564

Price on request

€103.85

€0

Overview

360° surface-mounted motion detector, normally open contact with zero-crossing circuit. 360° motion detector with increased detection sensitivity in the central presence detection area with integrated twilight switch for surface-mounted installation. For use indoors, for example: corridors, entrance halls, etc. The detector reacts to the infrared radiation (body heat) of moving bodies within a detection diameter of 6 m at a recommended installation height of 2.5 m. The signal is sent using a built-in pyroelectric sensor. The brightness value and the duty cycle are set using a potentiometer under an opening on the housing. Ready for immediate use thanks to the factory default setting. Test operation to check function and detection range.

Property	Value
Depth:	100 mm
Width:	100 mm
Height:	61 mm
Color:	white
Material:	Plastic
Mounting type:	Surface-mounted
Response brightness:	5 to 1000 lx
Protection class (IP):	IP21
Max. switching capacity:	2300 W
Voltage type:	AC
Max. range to one side:	6 m
Scan angle:	360 °
Suitable for wall mounting:	no
Min. duty cycle:	5 s
Max. Duty cycle:	30 min
Creep under protection/rear field monitoring:	no
Temperature:	-5 to 45 °C
Adjustable response brightness:	yes
Adjustable response sensitivity:	yes
Max. range, frontal:	6 m
Max. Inrush current:	10 A
Sensor type:	passive infrared
Optimal mounting height:	4 m
Surface finish:	matt
Surface:	untreated
Material quality:	thermoplastic
Number of switching zones:	1
Horizontal detection angle:	360 °
Frequency:	50 to 60 Hz
Constant light control:	no
HVAC control:	no
Forced shutdown:	no
Animal corridor:	no
Networkable:	yes
Staircase monitoring:	no
Bypass switch:	no
Suitable for wireless transmission:	no
Remote controllable:	yes
With signal unit:	no
Teach function for response brightness:	yes
With remote control:	no
Suitable for C load:	yes
With DALI interface:	no
Extension input:	yes
Forced switching on:	no
Suitable for ceiling mounting:	yes
Connection type:	screw terminal
Antibacterial treatment:	no
Impact resistance:	IK04
Diameter:	100 mm

Characteristics

Bridging switchNo

With signal unitNo

Number of switching zones1

Response brightness5 to 1000 lx

Forced shutdownNo

Max. inrush current10 A

Scanning angle360 °

Forced switching onNo

Manufacturer

HANEE804A

GTIN3250612258765

Connection typeScrew terminal

Response sensitivity adjustableYes

Response brightness adjustableYes

Antibacterial treatmentNo

Surface finishFrosted

Width100 mm

Diameter100 mm

Detection angle horizontal360°

Color

Remote controllableYes

Frequency50 to 60 Hz

Suitable for C-loadYes

Suitable for ceiling mountingYes

Suitable for wall mountingNo

Suitable for wireless transmissionNo

HVAC controlNo

Height61 mm

Constant light controlNo

Max. duty cycle30 min

Max. range frontal6m

Max. range to one side6m

Max. switching capacity2300W

Min. duty cycle5s

With DALI interfaceNo

With remoteNo

Mounting typeSurface-mounted

Extension inputYes

SurfaceUntreated

Optimal mounting height4m

Impact resistanceIK04

IP protection)IP21

Sensor type

Voltage typeAC

Teach function for response brightnessYes

Temperature-5 to 45 °C

Depth100 mm

Animal corridorNo

Staircase monitoringNo

Creep protection/rear field monitoringNo

NetworkableYes

MaterialPlastic

Material qualityThermoplastic

Hager EE804A 360° surface-mounted motion detector

Price on request

€103.85

€0

Into a basketIn the basketGo

Delivery in Europe

We will deliver your order to all European cities.

We are located

8200-121 Albufeira.R. Dr. Diogo Leote 35.

24 hours

We will send the order within 24 hours.

Hager EE804A 360° surface-mounted motion detector

Overview

Characteristics

Product selections in category:

See also Compare all