Bus motion detector, PIR detection range 12m x 110° (can be optimized using optionally available, interchangeable lenses, e.g. curtain or small animal immune lenses). The sensitivity to fault messages can be adjusted in two stages. Occupies one address. A triggering can be signaled by LED. Supply from the control center bus 12V (9 - 15V). Quiescent current consumption: 5mA, installation height: 2.5m, security level 2, EN 50131-1, EN 50131-2-2, environment according to EN 50131-1:II, operating temperature: -10 to +40°C. Dimensions: 60 x 97 x 52mm. Installation only possible by registered installation companies. Bus motion detector, PIR detection range 12m x 110° (can be optimized using optionally available, interchangeable lenses, e.g. curtain or small animal immune lenses). The sensitivity to fault messages can be adjusted in two stages. Occupies an address. A trigger can be signaled by means of an LED. Supply from the control center bus 12V (9 - 15V). Quiescent current consumption: 5mA, installation height: 2.5m, security level 2, EN 50131-1, EN 50131-2-2, environment according to EN 50131-1:II, operating temperature: -10 to +40°C. Dimensions: 60 x 97 x 52mm. Installation only possible by registered installation companies.
