Catalog

MERTEN MEG5510-1119 Presence Relay ARGUS 1-way polar white

In stock
SKU: 160762
€84.10
Into a basketIn the basketGo

Overview

Presence detector for ceiling mounting indoors. The sensor module detects moving heat sources (e.g. people) in an adjustable detection range and starts a staircase lighting time. For ohmic, inductive and capacitive loads such as incandescent lamps, energy-saving lamps, low-voltage halogen lighting with conventional transformers, electronic transformers, fluorescent lamps. The sensor module has a light sensor with an adjustable brightness threshold so that the lighting is only switched on below a certain brightness threshold. The presence function enables the sensor module to switch the lighting off even if a person is present if there is sufficient natural light. For installation in a 60 mm flush-mounted box or in the surface-mounted housing available as an accessory. With claw and screw fastening. With screw terminals. Functions: -Switching from one output. -External control via a PL input (sensor module on central unit insert (slave), extension unit plus). -Switching. -Brightness-dependent staircase light function. Nominal voltage: AC 220/230 V, 50/60 Hz. Nominal current: max. 10 AX, cos Phi =0.6. Outputs: 1x normally open contact. Max. switching capacity per channel: Incandescent lamps: 2200 W. HV halogen lamps: 2000 W. LV halogen lamps with wound transformer: 500 VA. Electronic transformers: 1050 W. Capacitive load: 10 A, 140 uF. Energy-saving lamps: 100 VA. Motor load: 1000 VA. Neutral conductor: required (3-conductor system). Connection cross-section: max. 2x2.5 mm2. Detection angle: 360 degrees. Number of levels: 6. Number of zones: 136. Number of motion sensors: 4. Recommended installation height: 2.5 m. Range: radius of max. 7 m (at an installation height of 2.50 m). Sensitivity: continuously adjustable. Brightness threshold: continuously adjustable from approx. 10 to approx. 1000 lux. Follow-up time: Channel 1: continuously adjustable from approx. 10 s to approx. 30 min.

Accessories:
Surface-mounted housing for ARGUS presence 550619.

Color: polar white.

Property Value
Depth: 72.0 mm
Width: 116.0 mm
Height: 116.0 mm
Design: Presence detector
Color: white
Rated voltage: 230.0 V
RAL number (similar): 9010.0
Material: Plastic
Mounting type: Flush-mounted
Response brightness: 10.0 to 1000.0 lx
Protection class (IP): IP20
Max. switching capacity: 2200.0 W
Voltage type: AC
Max. range to one side: 7.0 m
Scan angle: 360.0 °
Suitable for wall mounting: no
Min. duty cycle: 10.0 s
Max. Duty cycle: 30.0 min
Creep-under protection/rear field monitoring: yes
Temperature: -20.0 to 25.0 °C
Adjustable response brightness: yes
Adjustable response sensitivity: yes
Max. presence range: 113.0 m²
Max. frontal range: 7.0 m
Max. Inrush current: 10.0 A
Sensor type: passive infrared
Optimal mounting height: 2.5 m
Surface finish: glossy
Surface: untreated
Material quality: Thermoplastic
Detection field diameter on floor: 14.0 m
Number of switching zones: 136.0
Switch-off delay: 1800.0 s
Switch-on delay: 0.0 s
Horizontal detection angle: 0.0 to 360.0 °
Frequency: 50.0 to 60.0 Hz
Halogen-free: yes
Constant light control: no
HVAC control: no
Forced shutdown: no
Animal corridor: no
Networkable: yes
Staircase monitoring: yes
Bypass switch: no
Suitable for wireless transmission: no
Remote controllable: yes
With signal unit: no
Alarm function: no
Teach function for response brightness: no
Dimming function with dimming insert: no
Transparent: no
With remote control: no
Suitable for C load: no
With DALI interface: no
Extension input: yes
Forced switching on: no
Suitable for ceiling mounting: yes
Connection type: screw terminal
Antibacterial treatment: no
Impact resistance: IK02
Min. Inrush current: 0.0 A
Diameter: 116.0 mm
Installation width: 60.0 mm
Installation depth: 30.0 mm
Installation length: 60.0 mm
Installation diameter: 60.0 mm
Min. depth of device box: 46.0 mm

Characteristics

Bridging switchNo
With signal unitNo
Number of switching zones136.0
Response brightness10.0 to 1000.0 lx
Forced shutdownNo
Max. inrush current10.0 A
Scanning angle360.0 °
Forced switching onNo
Max. presence range113.0 m²
ManufacturerMERTEN
HANMEG5510-1119
GTIN4042811182380
Dimming function with dimming insertNo
Alarm functionNo
Connection typeScrew terminal
Response sensitivity adjustableYes
Response brightness adjustableYes
Antibacterial treatmentNo
VersionPresence detector
Surface finishGlittering
Width116.0 mm
Diameter116.0 mm
Installation width60.0 mm
Installation diameter60.0 mm
Installation length60.0 mm
Installation depth30.0 mm
Detection field diameter on floor14.0m
Detection angle horizontal0.0 to 360.0 °
ColorWhite
Remote controllableYes
Frequency50.0 to 60.0 Hz
Suitable for C-loadNo
Suitable for ceiling mountingYes
Suitable for wall mountingNo
Suitable for wireless transmissionNo
HVAC controlNo
Halogen freeYes
Height116.0 mm
Constant light controlNo
Max. duty cycle30.0 min
Max. range frontal7.0m
Max. range to one side7.0m
Max. switching capacity2200.0W
Min. duty cycle10.0s
Min. depth of the device box46.0 mm
With DALI interfaceNo
With remoteNo
Mounting typeFlush-mounted
Extension inputYes
Nominal voltage230.0V
SurfaceUntreated
Optimal mounting height2.5m
RAL number (similar)9010.0
Impact resistanceIK02
IP protection)IP20
Sensor typePassive infrared
Voltage typeAC
Teach function for response brightnessNo
Temperature-20.0 to 25.0 °C
Depth72.0 mm
Animal corridorNo
TransparentNo
Staircase monitoringYes
Creep protection/rear field monitoringYes
NetworkableYes
MaterialPlastic
Material qualityThermoplastic
MERTEN MEG5510-1119 Presence Relay ARGUS 1-way polar white
MERTEN MEG5510-1119 Presence Relay ARGUS 1-way polar white
€84.10
Into a basketIn the basketGo
Delivery in Europe
We will deliver your order to all European cities.
In cash, by bank card or online
We are located
8200-121 Albufeira.R. Dr. Diogo Leote 35.
24 hours
We will send the order within 24 hours.
HomeCatalogSearchProfile0Cart