DeltaS 19' standing cabinet Glass door at the front with hinges and lockable swivel lever handle. A solid sheet or perforated door can also be supplied on request. The design allows the door to be opened 180° and easy to disassemble and assemble with right or left hinges. Removable and lockable side and rear panels with the same lock as the front door. Cable ducts on the top and bottom edge of the rear panel, in the floor and roof of the distributor. All ducts are covered with knock-out blanking plates. The area for the cable ducts has been increased to 333 cm². 2 pairs of depth-adjustable vertical mounting strips, which in this version are also adjustable in width. A third pair of vertical mounting rails pre-assembled Openings for the ventilation units are located in the distributor floor and roof. The opening in the roof is provided with a hinged 3D cover, and there is a knock-out cover in the floor and roof. Frame made of 1.5 mm sheet steel, 4-fold folded Glue-in blanking plate with dust protection brush Perforation in the lower and upper sections for natural ventilation Complete earthing system for the individual distribution parts Accessory pack with 16 x cage nuts and screws M6 x 16, brush strip and leveling feet Also available in black on request
