As an infrared heater, the wall mirror heating element is used in a fixed location to heat closed rooms in living and working environments. The wall mirror heating element of the VM series is suitable for surface mounting on the wall. The heating element can be mounted in both landscape and portrait format. The effective yet decorative Vitramo wall heating element uses radiation to heat walls that enclose the room and the floor in such a way that they only have small temperature differences between them. Only when it comes into contact with the warm surfaces does the room air heat up evenly and with almost no flow. This means that the conditions for living comfort are met without unnecessary energy consumption. The wall mirror heating element is produced in a sandwich structure. It consists of a single-pane safety glass pane (ESG mirror, 5 mm thick with rounded corners R = 5 mm), which is heated on the back by a heating layer that converts electrical energy into heat. This layer is embedded in a glass fiber reinforced plastic mass. The back is completed by a bare aluminum cover that also encloses the sides. Surface temperature max. 80 °C at an ambient temperature of 20 °C. Thanks to the thermally separated structure, wall heating elements achieve a high radiation efficiency in the room. For the mains connection, the heating elements are equipped with a connecting cable made of black silicone, 1.2 m long without a power plug. For operation as a stationary single-room heater, an additional room thermostat with weekly programming and detection of open windows and/or adaptive control of the start of heating and/or remote control option (outside the building) is required. The Vitramo room thermostat VTD-UP and those of the VTX series control Vitramo ceiling and wall heating elements in accordance with eco-design. Vitramo heating elements may only be installed by a specialist. Vitramo is a leading manufacturer and produces wall and ceiling infrared heaters exclusively in Germany.
