Wired digital room thermostat for heating control as a wall unit. Temperature control accurate to the degree. 3 buttons. Operating mode: Comfort, Economy, Frost Protection, Off. Easy to use. Control range restriction. In order to plan the Vitramo heating system optimally, it is not only designed according to DIN EN 12831, but also adapted to the specific conditions of the building. During the planning phase, a building is divided into rooms, demand zones and heating areas depending on its size and use. A demand zone represents a room/room area that is determined by its specific type of use and conditions such as cooling, ventilation, air humidity, etc. Every room requires a room thermostat to regulate the air temperature. Wired room thermostats as room temperature controllers are wired directly to a heating element or connected via the DS-P control unit. Due to the structural conditions, these devices are often used in new buildings or as part of a renovation. If the installed power exceeds the specified switching capacity of the respective room thermostat, the heating elements must be switched via additional load relays type LS-E. In any case, the life of the room thermostat is extended if a load relay takes over the work.
