Increases your safety: Wiha slimBits ensure good and protected access to deep-lying screws. Saves space: Space saving thanks to the extensive interchangeable bit system. Offers you full protection: Each tool is individually tested at 10,000 V AC and approved for 1,000 V AC. Application: For work on live parts up to 1,000 V AC. Note: 6 mm slimBits can only be used in the slimVario® bit holder and slimTorqueBit holder (VDE torque system). The blade diameter of conventional electrician screwdrivers is often too large to reach deep-lying screws. However, removing the insulation is not permitted and also endangers your own safety. With the Wiha slimTECHNOLOGY, which was specially developed for electrical applications, the protective insulation has been integrated into the blade to enable blades that are up to 33% slimmer. This means that even deep-lying screw and spring elements can be reached effortlessly with the slimBits. The insulated slimBits are subjected to a routine test in accordance with the international standard IEC 60900 and enable safe work in the area of live parts up to 1,000 V AC. VDE and GS tested. Tested in accordance with IEC 60900.
