Simplifies your work: Dirt and dust-free work compared to using a machine. Increases your efficiency: Scaled screwdriver blade enables detailed depth measurement. Perfectly dimensioned dowel hole thanks to dimensionally adapted screwdriver blade. Protects your health: Dowel hole hammer makes work easier thanks to its low weight and does not cause loud machine noises. Increases your safety: Galvanic separation in the handle prevents penetration between the striking cap and the blade. Saves time: Dowel holes can be made anytime and anywhere using a hammer, regardless of whether there is a power outlet nearby. Application: Dowel holes for aerated concrete, lightweight concrete, plasterboard, perforated bricks up to max. 650kg/m³. There is more to the dowel hole hammer than you might initially think. A special construction on the inside galvanically separates the blade from the steel cap. This makes the tool ideal for quickly and easily hammering in dowel holes. No drill. No dirt. No constant noise. The galvanic separation between the blade and the steel cap means the user is always protected, even if a power line is accidentally hit. The profile has also been optimized to ensure that as few splinters as possible occur when hitting the wall. The scale on the blade shows the user quickly and conveniently how deep the hole already is. The soft zone of the ergonomically shaped SoftFinish® multi-component handle is made of a special material that is kind to the skin and is comfortable to hold. ATTENTION: Not a product according to IEC 60900. Blade not insulated, must not be touched during use. Safe access at the rear of the handle area, as the impact cap is galvanically separated from the blade and protected against puncture. Contents: 1x dowel hole punch 2x 30 mm dowels 2x 40 mm dowels.
