Catalog

Wiha 44309 SB2551301 contactless, single-pole 12 – 1,000 V AC

In stock
SKU: 999006
€58.17
Into a basketIn the basketGo

Overview

Increases your efficiency: Integrated, bright LED flashlight. Saves time: Fast voltage testing through non-contact measurement. Increases your flexibility: Voltage tester covers a wide voltage range from 12 - 1,000 V AC. Increases your efficiency: Can be used for all sockets worldwide thanks to internationally adapted measuring tip. Application: For detecting and locating live conductors, cable breaks and breaks, blown fuses, defective lamps on fairy lights and individual wire detection. Before starting an electrical installation, electricians must ensure that the work area is free of voltage. A voltage tester is required to test alternating electrical fields or to locate suspected sources of error. An initial indication of whether there is no voltage is possible with the non-contact Wiha voltage tester thanks to the optical and acoustic signal. After switching on, the permanently green LED indicates that the device is ready for use. During the voltage test, the LEDs light up from blue (weak) to orange to red (strong) depending on the strength of the alternating electrical field. Two AAA batteries are required for use, which are included in the delivery. If the device is not used for 4 minutes, it switches off automatically to save energy. An integrated LED flashlight enables the measuring point to be illuminated in dark environments and can be used as a flashlight by manually switching it on and off. Thanks to its handy size, the voltage tester with clip fits comfortably in any shirt or trouser pocket. Thanks to the internationally adapted measuring tip, the voltage tester is suitable for all socket variants worldwide. The single-pole voltage tester is subject to the EN 61010-1 / IEC 61326 standard and is designed for CAT IV 1,000 VAC. Furthermore, the tool is approved for use in potentially explosive areas (Category II) according to the ATEX standard. For electrical applications Before and after each use, the voltage tester must be tested on a known voltage source to ensure that it is functioning properly. EN 61010-1, IEC 61326, IP67.

< td>Tracking device
Property Value
Type:
Color: red/yellow
EAN: 4010995443092
Manufacturer No.: SB2551301
Intended use: Fast voltage testing using non-contact measurement
Operating mode: Battery operation
Illumination: Integrated bright LED flashlight
Measurement category: CAT IV
Measurement range: Alternating voltage, from 12 V to 1,000 V
Safety: Protection class IP 67
Operating temperature range: From -20 °C to 40 °C
Feature: Can be used for all sockets worldwide thanks to the internationally adapted measuring tip
Accessories: available, 2x AAA batteries
Dimensions: General, width: 29 mm x depth/length: 150 mm
Weight: 100 grams

Characteristics

EAN4010995443092
Operating modeAkku-Betrieb
LightingIntegrated bright LED flashlight
SafetyProtection class IP 67
ManufacturerWiha
HAN44309
GTIN4010995443092
DimensionsGeneral , Width: 29 mm x Depth/Length: 150 mm
FeatureCan be used for all sockets worldwide thanks to internationally adapted measuring tip
Weight100 gram
Manufacturer No.SB2551301
TypeTracking device
Purpose of useFast voltage testing through non-contact measurement
AccesoriesAvailable, 2x AAA batteries
Wiha 44309 SB2551301 contactless, single-pole 12 – 1,000 V AC
Wiha 44309 SB2551301 contactless, single-pole 12 – 1,000 V AC
€58.17
Into a basketIn the basketGo
Delivery in Europe
We will deliver your order to all European cities.
In cash, by bank card or online
We are located
8200-121 Albufeira.R. Dr. Diogo Leote 35.
24 hours
We will send the order within 24 hours.
HomeCatalogSearchProfile0Cart