Simplifies your work: Large LCD display with backlight for easy-to-read measurement results. Increases your safety: Measurement of live cables without open contacts. Makes handling easier: Simple one-handed testing without interrupting the circuit. Increases your efficiency: All tests relevant to electricians with just one measuring device. Simplifies your work: An integrated flashlight function ensures optimal lighting conditions. Increases your process reliability: Precise measurement results thanks to LPF and TRUE RMS measurement. Application: For multifunctional use at different locations. Standards: CAT IV 1,000 V When working on electrical systems that cannot be switched off, for example, current measurements are a major challenge. With the Wiha current clamp meter, measurements can be carried out using the clamp fork without interrupting the circuit. Handling is made much easier by the contactless one-handed testing. The test probes enable further tests: voltage measurements in the AC and DC range as well as resistance, frequency and capacitance measurements. They also enable continuity tests and diode tests. This multifunctionality increases efficiency significantly. The measurement results can be read immediately and after the measurement process using a large LCD display with backlight and data hold function. An additional signal tone signals the flow of current during the continuity test. In addition, the Wiha current clamp meter offers optimal lighting conditions thanks to the integrated flashlight function, even in poorly lit work environments. The LPF function, together with the True RMS function, increases the process reliability of your test by providing interference-free effective values. In accordance with the measurement category CAT IV up to 1,000 V, the current clamp meter offers maximum safety for working directly on sources of the low-voltage installation. IP40.
