KNX DALI gateway TW REG housing 4 TE with electronic manual operation and LED status display ETS product family lighting Product type dimmer Intended use Control of lights and other applications with DALI operating devices in KNX installations, e.g. electronic ballast Installation on top hat rail according to DIN EN 60715 in sub-distribution board Product features Control of max. 64 DALI participants in max. 32 groups Setting the color temperature for lights with DALI Device Type 8 for Tunable White according to IEC 62386-209 Individual, group or central addressing Suitable for operation in centrally supplied emergency lighting systems 16 light scenes Effect control for dynamic light effects or color games Read out DALI device status via KNX, e.g. brightness or light faults Manual operation of the DALI groups Forced control function Feedback of switching status and brightness value in bus and manual operation Collective feedback Central switching function Locking function for each DALI group Separate switch-on and switch-off delay Staircase light switch with pre-warning function Corridor function: In combination with motion detectors, reduced continuous lighting if no movement is detected Online or offline configuration of the DALI devices with ETS plug-in Short-circuit protection Overvoltage protection Overload protection Operating hour counter Reporting of the global switching status of the DALI devices, e.g. for switching off the mains voltage of the DALI devices to avoid standby losses Replacement of an individual DALI device during operation is possible without software From device generation V02: DALI-2 certified Linear or logarithmic dimming characteristic can be set
