KNX switching actuator 8-way C-load with current detection REG housing 8 TE 8 NO contacts with mechanical manual operation and status display Full functionality is supported from ETS3.0d or higher. ETS product family output Product type binary output 8-way Intended use Switching electrical consumers AC 110 ... 230 V or AC/DC 24 V with potential-free contacts Installation on top hat rail according to DIN EN 60715 in sub-distribution boards Product features Manual operation of the relays independent of the bus NO or NC operation Linking and forced operation function Switching feedback (bus operation only) Switch position display Central switching function with collective feedback Locking function for each Channel Time functions: On and off delay, stairwell light switch with advance warning function Integration into lighting scenes Operating hours counter, configurable via bus Input monitoring for cyclical updating with safety circuit No additional power supply required Current detection: Measurement of the load current for each output Monitoring of threshold values for load monitoring, e.g. for reporting load failure Switching of capacitive loads and the resulting high inrush currents
