eNet button standard 1-way 1-way, Duroplast, AS series, alpine white for inserts 'blinds' item nos.: 1730 JE and 1731 JE for inserts 'light' item nos.: 1701 SE, 1701 PSE, 1702 SE, 1704 ESE, 1710 DE, 1711 DE, 1713 DSTE, 1723 NE Intended use Manual, radio and time-controlled operation of e.g. blinds, roller shutters, awnings, lighting or fans Transmitter for radio transmission of switching, dimming and blind commands Operation with system insert for switching, dimming, blinds or extension 3-wire Product features Status feedback to Radio transmitter Status display with LED Night mode Evaluation of the extension inputs (if available) to control the insert Functions in combination with blind insert Positioning of curtains via scene call Position for sun protection and twilight Running time and ventilation position of the curtain can be saved Functions in combination with light insert Scene operation possible Switch-on brightness can be saved permanently when combined with flush-mounted inserts for dimming Functions in combination with switching insert relay, 2-channel Output a2 switches depending on output a1, e.g. to switch ventilation on depending on the lighting and switch it off with a delay. Switch-on delay for output a2 can be set Follow-up time for output a2 can be set Can be set with eNet server from version 2.2 (depending on the insert): Repeater function Slat reversal time/fabric tautness time Reversal time when changing direction Direction of travel can be inverted Operating locks Deactivate extension evaluation Position for sun protection, twilight, lock-out protection and wind alarm Maximum brightness Minimum brightness Dimming speed Switch-on/switch-off delay Dimming ramp up/down Switch-off warning Permanently on, permanently off Hotel function Follow-up time Light control In conjunction with the eNet button standard, the eNet server must have at least version 2.3. Additional functions with eNet server: Fully encrypted radio transmission (AES-CCM) Update of the device software Read out error memory A labeling order from the GRAPHIC TOOL must be placed together with the order: www.jung.de/gt A subsequent labeling of the buttons is not possible.
