BEGA bollard light tube as car drive-through protection 84016 for BEGA system bollard lights. Bollard light tube and anchorage are designed for three applications in conjunction with a foundation to be created on site: 1. Impact protection for an impact load of 10 kN in accordance with DIN 1991-1-7 (roughly corresponds to a car with 1.5 t up to 10 km/h). 2. Drive-through protection for a car max. 1.5 t and a speed of up to 50 km/h. Statically calculated and designed based on PA68:2013 British Standard and Europe IWA 14-1:2013. 3. Drive-through protection for a truck max. 7.5 t and a speed of up to 50 km/h. Validated in accordance with PAS 68:2013 British Standard and Europe IWA 14-1:2013. Bollard light tube made of aluminum and cast aluminum, color graphite. Ground piece made of steel, material number S335JRH, hot-dip galvanized in accordance with EN ISO 1461. 3 threaded inserts with fastening screws M8 x 35 made of stainless steel, material number: 1.4301. Pitch circle diameter 200 mm. 2 side cable entries 50 x 100 mm. With built-in connection box 70632. For through-wiring for 2 cables up to 5 x 4 mm² with fuse Neozed D 01 6 A. Dimensions: 220 x 220 mm. Height above floor 875 mm.
