Catalog

Bega 50313K3 ceiling and wall light for indoor use, stove enamel. white 3000 K (replacement glass: 11003279.0RG)

In stock
SKU: 330462
€449.90
Into a basketIn the basketGo

Overview

BEGA PRIMA ceiling and wall light 50313K3 for indoor use. LED, 28 W luminaire connected load, luminaire luminous flux 2658 lm, colour temperature 3000 K. Colour rendering index (CRI) > 90. With replaceable BEGA LED module with overtemperature protection and a service life of at least 50,000 operating hours. 20-year guarantee on the LED module and wearing parts. With LED power supply 230 V, 50 Hz. Integrated HF motion sensor. Metal luminaire fitting. Surface white enamel finish. Hand-blown satin opal glass. Two cable entries for through-wiring the power cable up to 10.5 mm, max. 3 x 1.5 mm². Dimensions: 320 x 100 x 100 mm.

PropertyValue
Max. System power:27.7 W
Rated luminous flux according to IEC 62722-2-1:2716 lm
Length:100 mm
Width:320 mm
Height/depth:320 mm
Protection rating (IP):IP20
Protection class:I
Nominal voltage:230 V
Housing color:white
Housing material:other
Color temperature:3000 K
Impact resistance:IK03
Color rendering index CRI:90-100
Suitable for ceiling mounting:yes
Suitable for wall mounting:yes
Voltage type:AC
With motion detector:yes
With light source:yes
Light source:LED replaceable
Rated ambient temperature according to IEC62722-2-1:25 °C
With control gear:yes
Cover material:opal glass
With light sensor:yes
Control gear:not required
Suitable for recessed mounting:no
Suitable for light strip configuration:no
Suitable for pendant suspension:no
Suitable for surface mounting:yes
DMX dimming:no
Dimming DSI:no
With air slots:no
Dimming LineSwitch:no
Dimming potentiometer (device-integrated):no
Dimming 0-10 V:no
Dimming GPRS:no
Dimming 1-10 V:no
Dimming manufacturer-specific:no
Dimming DALI:no
Dimming Mains voltage modulation:no
Dimming trailing edge phase control:no
Dimming leading edge phase control:no
Dimming programmable:no
Dimming RF:no
Dimming Sine Wave Reduction:no
Dimming Touch and Dim:no
Dimming Zigbee:no
Dimming with push button:no
Suitable for lamp power:23.1 W

Characteristics

HAB(Glass No. 113279.0EG) 3000K T3
ManufacturerBega
HAN50313K3
GTIN4044018208320
Rated luminous flux according to IEC 62722-2-12716lm
Rated ambient temperature according to IEC62722-2-125°C
Operating deviceNot required
Width320 mm
Dimming 0-10 VNo
Dimming 1-10 VNo
Dimming DALINo
Dimming DMXNo
Dimming DSINo
Dimming GPRSNo
Dimming LineSwitchNo
Dimming mains voltage modulationNo
Dimming trailing edgeNo
Dimming phase controlNo
Dimming potentiometer (integrated)No
Dimming RFNo
Dimming Sine Wave ReductionNo
Dimming Touch and DimNo
Dimming ZigbeeNo
Dimming manufacturer-specificNo
Dimming with push buttonNo
Dimming programmableNo
Color temperature3000K
Color rendering index CRI90-100
Suitable for surface mountingYes
Suitable for ceiling mountingYes
Suitable for flush mountingNo
Suitable for lamp power23.1W
Suitable for light strip configurationNo
Suitable for pendulum suspensionNo
Suitable for wall mountingYes
Housing colorWhite
Height/Depth320 mm
LampsLED replaceable
Length100 mm
Max. system performance27.7W
With operating deviceYes
With motion detectorYes
With light sourceYes
With light sensorYes
With air slotsNo
Nominal voltage230V
Impact resistanceIK03
IP protection)IP20
Protection classI
Voltage typeAC
Cover materialGlass opal
Housing materialOther
Bega 50313K3 ceiling and wall light for indoor use, stove enamel. white 3000 K (replacement glass: 11003279.0RG)
€449.90
Into a basketIn the basketGo
Delivery in Europe
We will deliver your order to all European cities.
In cash, by bank card or online
We are located
8200-121 Albufeira.R. Dr. Diogo Leote 35.
24 hours
We will send the order within 24 hours.
HomeCatalogSearchProfile0Cart