Catalog

Bega 50537.2K3 ceiling and wall light for indoor use, stainless steel 3000 K (replacement glass: 1100286511RG)

In stock
SKU: 406757
€546.25
Into a basketIn the basketGo

Overview

BEGA ceiling and wall light 50537.2K3 for indoor use. Unshielded light. LED, 18 W luminaire connected load, luminaire luminous flux 1417 lm, color temperature 3000 K. Color rendering index (CRI) > 90. With replaceable BEGA LED module with overtemperature protection and a service life of at least 50,000 operating hours. 20-year guarantee on the LED module and wearing parts. With BEGA Ultimate Driver® LED power supply, DALI controllable, 220-240 V, 0/50-60 Hz. Protection class IP 65. Luminaire housing made of cast aluminum. Stainless steel surface. Crystal glass inside white. Two cable entries for through-wiring the power cable up to Ø 10.5 mm, max. 5 x 1.5 mm². Luminaire diameter 260 mm, height 80 mm.

PropertyValue
Max. System power:18 W
Rated luminous flux according to IEC 62722-2-1:1417 lm
Length:80 mm
Width:260 mm
Height/depth:260 mm
Protection rating (IP):IP65
Protection class:I
Nominal voltage:220 to 240 V
Housing color:stainless steel
Housing material:other
Color temperature:3000 K
Impact resistance:IK07
Color rendering index CRI:90-100
Suitable for ceiling mounting:yes
Suitable for wall mounting:yes
Voltage type:AC/DC
With light source:yes
Light source:LED replaceable
Rated ambient temperature according to IEC62722-2-1:25 °C
With Operating device:yes
Cover material:transparent glass
Operating device:not required
Suitable for recessed mounting:no
Suitable for strip light configuration:no
Suitable for pendant suspension:no
Suitable for surface mounting:yes
DMX dimming:no
DSI dimming:no
With air slots:no
Dimming LineSwitch:no
Dimming potentiometer (integrated in device):no
Dimming 0-10 V:no
Dimming GPRS:no
Dimming 1-10 V:no
Dimming manufacturer-specific:no
Dimming DALI:yes
Dimming mains voltage modulation:no
Dimming trailing edge:no
Dimming leading edge:no
Dimming programmable:no
Dimming RF:no
Dimming Sine Wave Reduction:no
Dimming Touch and Dim:no
Dimming Zigbee:no
Dimming with push button:no
Suitable for lamp power:15.1 W

Characteristics

HAB50537.2K3 (Glass 1100286511RG) 3000K T3
ManufacturerBega
HAN50537.2K3
GTIN4044018236392
Rated luminous flux according to IEC 62722-2-11417lm
Rated ambient temperature according to IEC62722-2-125°C
Operating deviceNot required
Width260 mm
Dimming 0-10 VNo
Dimming 1-10 VNo
Dimming DALIYes
Dimming DMXNo
Dimming DSINo
Dimming GPRSNo
Dimming LineSwitchNo
Dimming mains voltage modulationNo
Dimming trailing edgeNo
Dimming phase controlNo
Dimming potentiometer (integrated)No
Dimming RFNo
Dimming Sine Wave ReductionNo
Dimming Touch and DimNo
Dimming ZigbeeNo
Dimming manufacturer-specificNo
Dimming with push buttonNo
Dimming programmableNo
Color temperature3000K
Color rendering index CRI90-100
Suitable for surface mountingYes
Suitable for ceiling mountingYes
Suitable for flush mountingNo
Suitable for lamp power15.1W
Suitable for light strip configurationNo
Suitable for pendulum suspensionNo
Suitable for wall mountingYes
Housing colorStainless steel
Height/Depth260 mm
LampsLED replaceable
Length80 mm
Max. system performance18W
With operating deviceYes
With light sourceYes
With air slotsNo
Nominal voltage220 to 240 V
Impact resistanceIK07
IP protection)IP65
Protection classI
Voltage typeAC/DC
Cover materialGlass transparent
Housing materialOther
Bega 50537.2K3 ceiling and wall light for indoor use, stainless steel 3000 K (replacement glass: 1100286511RG)
€546.25
Into a basketIn the basketGo
Delivery in Europe
We will deliver your order to all European cities.
In cash, by bank card or online
We are located
8200-121 Albufeira.R. Dr. Diogo Leote 35.
24 hours
We will send the order within 24 hours.
HomeCatalogSearchProfile0Cart