LED flex board, 50 mm, CRI > 95, 10 W / m, IP00, LED white light, 2,700K, CRI > 95 LED flex board for decorative, technical and efficient lighting of light coves, linear applications and backlighting, basic or general lighting of rooms, architectural applications and for areas in which high illumination is desired, such as indirect or direct lighting, light ceilings, restaurant lighting and much more. Length: 50.0 mm Lamp power per meter: 10.0 W / m, Luminous flux per meter: 780.0 lm / m, Protection class on the room side: IP00, Protection class: III, Voltage: 24V DC, Beam angle: 120.0 °, 60 LEDs per meter, Chip spacing (short pitch): 8.3 mm. For individual use, the LED flex board can be shortened every 50 mm. The maximum system length of 10,000 mm must not be exceeded with one feed.
| Property | Value |
| Lamp power per meter: | 10 W |
| With connection set: | yes |
| Length of the individual sections: | 50 mm |
| Number of lamps per meter: | 60 |
| Smallest bending radius: | 25 mm |
| Width: | 10 mm |
| Length: | 50 mm |
| Beam angle: | 120 ° |
| Design: | Band |
| Color temperature: | 2700 K |
| Light source: | LED not replaceable |
| Protection class (IP): | IP00 |
| Self-adhesive: | yes |
| Voltage type: | DC |
| Luminous flux per meter: | 780 lm |
| Lamp voltage: | 24 V |
| Operating device: | LED operating device voltage controlled |
| Rated service life L70/B50 at 25 °C: | 50000 h |
| Protection class: | III |
| Light color: | white |
| Color rendering index CRI: | 90-100 |
| Height/depth: | 1.4 mm |
| Number of poles: | 2 |
