LED DALI bollard light made of high-quality aluminum. Dirt-repellent thanks to powder coating with lotus effect. Light head: opal satin. Light emission: 180°. Electronic ballast (DALI) integrated, installation without additional accessories. DALI interface for 2-pin DALI control line. High-quality housing, die-cast aluminum, powder-coated anthracite, similar to RAL 7016. Installation type: mounting plate for screwing onto a foundation, optionally using ground anchor (accessory). Color temperature 4000 K.
| Property | Value |
| Cover material: | Opal plastic |
| Impact resistance: | IK10 |
| With light source: | yes |
| Protection class: | I |
| Light source: | LED not replaceable |
| Nominal voltage: | 200 to 240 V |
| Suitable for number of light sources: | 1 |
| Diameter: | 170 mm |
| Socket: | without |
| Cover material Housing: | Aluminium |
| Protection class (IP): | IP65 |
| Type of luminaire: | Bollard light |
| Operating device: | LED operating device, current-controlled |
| Rated luminous flux according to IEC 62722-2-1: | 630 lm |
| Color temperature: | 4000 to 4100 K |
| Color rendering index CRI: | 80-89 |
| Light color: | white |
| With operating device: | yes |
| With motion detector: | no |
| With light sensor: | no |
| Voltage type: | AC |
| With base plate: | yes |
| Surface: | powder-coated |
| Light distributor: | diffuser lens/optics/panel |
| Highest energy efficiency class of the replaceable lamp: | E |
| Rated service life L70/B50 at 25 °C: | 110,000 h |
| Max. System power: | 17.0 W |
| Power factor: | 0.850000 |
| Height/depth: | 940 mm |
| Type of wiring: | suitable for through wiring |
| Number of poles: | 5 |
| Conductor cross-section: | 2.50 mm² |
| Connection type: | Plug-in terminal |
