Catalog

EsyLux EM10025358 DEFENSOR MD 200° 24 IR 1C IP55 WH motion detector

In stock
SKU: 732977
€50.49
Into a basketIn the basketGo

Overview

Motion detector with 200° detection area and 24 m range (tangential). Password protection against unauthorized parameterization. Immediate operational readiness with factory settings. Simple parameterization using ESY-Pen and ESY app. Simple installation with plug-in terminals up to 2.5 mm. Simple through-wiring thanks to double membrane cable entry, also for 15 mm underground cables. Detection areas can be hidden using the included, cut-to-size lens mask. Very high overvoltage protection (surge 2 kV, burst 4 kV). Zero-crossing circuit for relay-friendly switching of LEDs. Button input. Pulse function. Special base for inside and outside corner mounting as an accessory.

PropertyValue
Depth:108 mm
Width:92 mm
Height:108 mm
Version:motion detector
Color:white
Nominal voltage:240 V
RAL number (similar):9003
Material:plastic
Mounting type:surface-mounted
Response brightness:2 to 2000 lx
Protection class (IP):IP55
Max. switching capacity:2300 W
Voltage type:AC
Max. range to one side:12.0 m
Scan angle:200 °
Suitable for wall mounting:yes
Min. duty cycle:60 s
Max. Duty cycle:240 min
Creep-under protection/rear field monitoring:no
Temperature:-25 to 50 °C
Adjustable response brightness:yes
Adjustable response sensitivity:yes
Max. frontal range:4.0 m
Max. Inrush current:800 A
Sensor type:passive infrared
Optimal installation height:3.0 m
Surface finish:matt
Material quality:thermoplastic
Detection field diameter on floor:24 m
Number of switching zones:1
Detection angle horizontal:100 to 200 °
Frequency:50 to 60 Hz
Halogen-free:no
Constant light control:no
HVAC control:no
Forced shutdown:no
Animal corridor:no
Networkable:no
Bypass switch:no
Suitable for wireless transmission:no
Remote controllable:yes
With signal unit:no
Alarm function:no
Teach function for response brightness:yes
Dimming function with dimming insert:no
Transparent:no
With remote control:no
Suitable for C load:yes
With DALI interface:no
Forced switching on:no
Suitable for ceiling mounting:no
Connection type:Plug-in terminal
Antibacterial treatment:no
Impact resistance:IK07

Characteristics

Bridging switchNo
With signal unitNo
Number of switching zones1
Response brightness2 to 2000 lx
Forced shutdownNo
Max. inrush current800 A
Scanning angle200 °
Forced switching onNo
HABDEFENSOR MD 200° 24 IR 1C IP55 WH
ManufacturerESYLUX
HANEM10025358
GTIN4015120025358
Dimming function with dimming insertNo
Alarm functionNo
Connection typePlug-in terminal
Response sensitivity adjustableYes
Response brightness adjustableYes
Antibacterial treatmentNo
VersionMotion detector
Surface finishFrosted
Width92 mm
Detection field diameter on floor24m
Detection angle horizontal100 to 200 °
ColorWhite
Remote controllableYes
Frequency50 to 60 Hz
Suitable for C-loadYes
Suitable for ceiling mountingNo
Suitable for wall mountingYes
Suitable for wireless transmissionNo
HVAC controlNo
Halogen freeNo
Height108 mm
Constant light controlNo
Max. duty cycle240 min
Max. range frontal4.0m
Max. range to one side12.0m
Max. switching capacity2300W
Min. duty cycle60s
With DALI interfaceNo
With remoteNo
Mounting typeSurface-mounted
Nominal voltage240V
Optimal mounting height3.0m
RAL number (similar)9003
Impact resistanceIK07
IP protection)IP55
Sensor typePassive infrared
Voltage typeAC
Teach function for response brightnessYes
Temperature-25 to 50 °C
Depth108 mm
Animal corridorNo
TransparentNo
Creep protection/rear field monitoringNo
NetworkableNo
MaterialPlastic
Material qualityThermoplastic
EsyLux EM10025358 DEFENSOR MD 200° 24 IR 1C IP55 WH motion detector
EsyLux EM10025358 DEFENSOR MD 200° 24 IR 1C IP55 WH motion detector
€50.49
Into a basketIn the basketGo
Delivery in Europe
We will deliver your order to all European cities.
In cash, by bank card or online
We are located
8200-121 Albufeira.R. Dr. Diogo Leote 35.
24 hours
We will send the order within 24 hours.
HomeCatalogSearchProfile0Cart