Home
Lamps and lights
Albert Lights
LED wall/ceiling lights
Albert Leuchten 696333 LED wall/ceiling light 20W 2200lm stainless steel

Albert Leuchten 696333 LED wall/ceiling light 20W 2200lm stainless steel

In stock

SKU: 283159

Price on request

€408.24

€0

Into a basketIn the basketGo

Overview

Wall light 696333, made of stainless steel with opal glass. , 1x20W LED, warm white 3000K, 2200lm, protection class IP 54, protection class I, dimensions: 320x320x60mm

Property	Value
System power:	20 W
Luminous flux:	2200 lm
Number of LM:	1
Length:	60 mm
Width:	320 mm
Height/depth:	320 mm
Protection type (IP):	IP54
Protection class:	I
Nominal voltage:	230 V
Housing color:	stainless steel
Housing material:	stainless steel
Color temperature:	3000 K
Color rendering index CRI:	80-89
Suitable for ceiling mounting:	yes
Voltage type:	AC
With motion detector:	no
Beam angle:	free beam/diffuse
With light source:	yes
Light source:	LED replaceable
Temperature:	15 to 25 °C
Connection type:	screw terminal
With operating device:	yes
Cover material:	structured glass
Light distributor:	without
Without dimming function:	yes
Light emission:	direct
Light distribution:	symmetrical
With light sensor:	no
Operating device:	LED operating device voltage controlled
Suitable for Recessed installation:	no
Light color:	white
Suitable for strip light configuration:	no
Suitable for pendant suspension:	no
Suitable for surface mounting:	yes
DMX dimming:	no
DSI dimming:	no
LineSwitch dimming:	no
Potentiometer dimming (integrated in the device):	no
0-10 V dimming:	no
Dimming 1-10 V:	no
Dimming manufacturer-specific:	no
Dimming DALI:	no
Dimming mains voltage modulation:	no
Dimming trailing edge:	yes
Dimming leading edge:	no
Dimming programmable:	no
Dimming RF:	no
Dimming Sine Wave Reduction:	no
Dimming Touch and Dim:	no
Dimming Zigbee:	no
Dimming with push button:	no
Protection class (NEMA):	other
Glow wire test according to IEC 60695-2-11:	without
Suitable for lamp power:	1 to 20 W
Power factor:	0.9
Type of wiring:	suitable for through wiring
Number of poles:	3
Conductor cross-section:	2.5 mm²
Surface protection Housing:	untreated
Energy efficiency class of the light source according to EU Directive 2019/2015:	E
Replaceable control gear:	yes
DALI-2 dimming:	no
Color consistency (McAdam ellipse):	SDCM3
Max. number of luminaires circuit breaker B16:	20
Max. Number of lights circuit breaker C16:	30
Emergency power supply integrated:	no
Flicker value Pst LM:	1
Stroboscopic effect value SVM:	0.4
Constant luminous flux control:	no
Photobiological safety according to EN 62471:	RG1
Glare limitation (UGR):	1
Adjustable color temperature:	no
Adjustable luminous flux:	no
Beam angle adjustable:	no
Operation via Bluetooth:	no
Compatible with Apple HomeKit:	no
Compatible with Google Assistant:	no
Compatible with Amazon Alexa:	no
IFTTT support available:	no

Characteristics

Number of LM1

Stroboscopic effect value SVM0.4

Flicker value Pst LM1

Manufacturer

HAN696333

GTIN4007235963335

Connection typeScrew terminal

Type of wiringSuitable for through wiring

Beam angleFree-radiating/diffuse

Beam angle adjustableNo

Replaceable operating deviceYes

Operation via BluetoothNo

Operating deviceLED control gear voltage controlled

Glare limitation (UGR)1

Width320 mm

Dimming 0-10 VNo

Dimming 1-10 VNo

Dimming DALINo

Dimming DALI-2No

Dimming DMXNo

Dimming DSINo

Dimming LineSwitchNo

Dimming mains voltage modulationNo

Dimming trailing edgeYes

Dimming phase controlNo

Dimming potentiometer (integrated)No

Dimming RFNo

Dimming Sine Wave ReductionNo

Dimming Touch and DimNo

Dimming ZigbeeNo

Dimming manufacturer-specificNo

Dimming with push buttonNo

Dimming programmableNo

Energy efficiency class of the light source according to EU Directive 2019/2015E

Color consistency (McAdam ellipse)SDCM3

Color temperature3000K

Color temperature adjustableNo

Color rendering index CRI80-89

Suitable for surface mountingYes

Suitable for ceiling mountingYes

Suitable for flush mountingNo

Suitable for lamp power1 to 20 W

Suitable for light strip configurationNo

Suitable for pendulum suspensionNo

Housing colorStainless steel

Glow wire test according to IEC 60695-2-11Without

Height/Depth320 mm

IFTTT support availableNo

Compatible with Amazon AlexaNo

Compatible with Apple HomeKitNo

Compatible with Google AssistantNo

Constant luminous flux controlNo

Power factor0.9

Conductor cross-section2.5 mm²

LampsLED replaceable

Light emissionDirect

Light colorWhite

Luminous flux2200lm

Luminous flux adjustableNo

Light distributorWithout

Light distributionSymmetrical

Length60 mm

Max. number of luminaires Circuit breaker B1620

Max. number of luminaires Circuit breaker C1630

With operating deviceYes

With motion detectorNo

With light sourceYes

With light sensorNo

Nominal voltage230V

Emergency power supply integratedNo

Surface protection housingUntreated

Without dimming functionYes

Photobiological safety according to EN 62471RG1

Number of poles3

IP protection)IP54

Protection class (NEMA)Other

Protection classI

Voltage typeAC

System performance20W

Temperature15 to 25 °C

Cover materialGlass structured

Housing materialStainless steel

Albert Leuchten 696333 LED wall/ceiling light 20W 2200lm stainless steel

Price on request

€408.24

€0

Into a basketIn the basketGo

Delivery in Europe

We will deliver your order to all European cities.

We are located

8200-121 Albufeira.R. Dr. Diogo Leote 35.

24 hours

We will send the order within 24 hours.

Albert Leuchten 696333 LED wall/ceiling light 20W 2200lm stainless steel

Overview

Characteristics

Product selections in category:

See also Compare all