Catalog

RZB 672275.002.1.07 Toledo Flat 1 LED wall / ceiling light

In stock
SKU: 532781
€305.87
Into a basketIn the basketGo

Overview

Design continuity with general lighting. We offer a comprehensive product range in the area of emergency lighting and general lighting. This means we can offer our customers integrated solutions for all areas of application, depending on the building project. LED service life 50,000 h (L70, B10). Light guide and plastic diffuser made of non-yellowing PMMA. Also suitable for high ceilings. Easy to install. Large luminaire spacing for escape route lighting. Unobtrusive design. Surface-mounted housing made of powder-coated sheet steel. Square cover plate made of powder-coated die-cast aluminum. Light guide and plastic cover made of non-yellowing plastic (PMMA). Cover made of opal matt plastic. Control gear installed. Light source (LED) included in delivery. Single battery system with integrated self-test and feedback via Dali bus exclusively to the RZB monitoring system 985405. Energy efficiency class A+

Property Value
Housing color: white
Protection type (IP): IP40
Protection class: I
Voltage type: AC
Color temperature: 4000 K
Length: 225 mm
Width: 225 mm
Height/Depth: 58 mm
Max. System performance: 20 W
Battery type: NiMh
Nominal operating time: 3 h
Rated luminous flux according to IEC 62722-2-1: 1650 lm
Luminous flux in standby mode: 450 lm
Operating device: LED operating device, current-controlled
Light source: LED not replaceable
Impact resistance: IK06
Socket: without
Nominal voltage: 200 to 240 V
With remote switch connection: no
Cover material: Opal plastic
With light source: yes
Monitoring device: Monitoring module (centrally supplied system)
Mounting type: Wall mounting/ceiling mounting
Material of the housing: Steel
Suitable for type of marking: other
Feed-in: decentralized (single battery)
Function: Escape route lighting
With pictogram: no
Suitable for number of lamps: 1
Number of lamp heads: 1
LED nominal current at constant current: 83 to 100 mA
Light distributor: without
Protection class (NEMA): other
Luminaire with limited surface temperature 'D-mark': no
Rated ambient temperature according to IEC62722-2-1: 25 to 30 °C
Power factor: 0.90
Type of wiring: suitable for through wiring
Number of poles: 6
Conductor cross-section: 2.50 mm²
Connection type: Plug connection

Characteristics

HABToledo Flat 1
ManufacturerRZB
HAN672275.002.1.07
GTIN4051859215585
Connection typePlug connection
Type of wiringSuitable for through wiring
Rated luminous flux according to IEC 62722-2-11650lm
Rated ambient temperature according to IEC62722-2-125 to 30 °C
Operating deviceLED control gear current controlled
Width225 mm
Color temperature4000K
VersionWithout
FunctionEscape route lighting
Suitable for number of lamps1
Housing colorWhite
Height/Depth58 mm
LED nominal current at constant current83 to 100 mA
Power factor0.90
Conductor cross-section2.50 mm²
Luminaire with limited surface temperature D-markNo
LampsLED not replaceable
Light distributorWithout
Length225 mm
Max. system performance20W
With light sourceYes
Mounting typeWall mounting/ceiling mounting
Nominal voltage200 to 240 V
Number of poles6
Impact resistanceIK06
IP protection)IP40
Protection class (NEMA)Other
Protection classI
Voltage typeAC
Cover materialPlastic opal
Housing materialSteel
RZB 672275.002.1.07 Toledo Flat 1 LED wall / ceiling light
RZB 672275.002.1.07 Toledo Flat 1 LED wall / ceiling light
€305.87
Into a basketIn the basketGo
Delivery in Europe
We will deliver your order to all European cities.
In cash, by bank card or online
We are located
8200-121 Albufeira.R. Dr. Diogo Leote 35.
24 hours
We will send the order within 24 hours.
HomeCatalogSearchProfile0Cart