Luminaire head of the modular, decorative LED light column system. Version with clear PMMA cover. The column system is designed for use in areas of terrain category 1 to wind zone 4. For mounting on a compatible system standpipe. Compatible system standpipes available as a separate unit in various lengths and alternatively with a base plate or ground piece. The steel standpipes have a diameter of 193.7 mm. Optical system designed in multi-lens technology (MLT). Luminaire optics consisting of highly efficient, UV and temperature-resistant lens systems. With asymmetrical wide beam light distribution. Other beam characteristics are available for flexible adaptation to customer-specific lighting tasks. Rated luminous flux 1200 lm, rated power 9.50 W, luminaire luminous efficacy 126 lm/W. Light color neutral white, correlated color temperature (CCT) 4000 K, general color rendering index (CRI) Ra > 70. Color location tolerance (initial MacAdam) 5 SDCM, other LED light colors available on request. Average rated service life LCLO(tq 25 °C) = 100,000 h. The light source is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Luminaire body made of die-cast aluminum Ø 193.7 mm. Color anthracite, similar to DB703 with metallic effect, highly weather-resistant, powder-coated. (DB 703). Coating suitable for sea weather on request. Other colors and anti-graffiti coating on request. End cylinder made of PMMA, clear. Luminaire body can be rotated horizontally by 360 °. No screws are visible in the connection area between the standpipe and the luminaire head. A design joint visually underlines the modularity of the light column system. Protection class (EN 61140): II, protection type (DIN EN 60529): IP65, impact resistance according to IEC 62262: IK05. Wind attack area fw 0.190 m2. Weight: 15.0 kg. Wired ready for connection with freely hanging electrical connection cable. With electronic control gear, digitally dimmable (DALI). Control gear according to DALI-2 standard (EN 62386). The control gear is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Surge voltage resistance 6/10 kV. Parameterizable ballast with constant luminous flux (CLO). Connected load at end of service life: 10.00 W. The product meets the basic requirements of the applicable EU directives and the Product Safety Act and bears the CE marking. In addition, the light is ENEC-certified by an independent testing center.
