Trilux 7298151 Actison Fit D2 CDP 20000-840 ETDD+LLWC LED ceiling light, white

Ball-proof LED surface-mounted luminaire with CDP cover plate, tested in accordance with DIN0710-13. Suitable for use in sports facilities in accordance with DIN 18032-3. The tests were carried out by an institute accredited in accordance with DIN EN ISO 17025 (VDE-Prüf- und Validierungsinstitut GmbH / ISP GmbH - Institut für Sportstättenprüfung, Münster). LED modules and operating devices are combined in a sustainable assembly. This can be replaced without dismantling the luminaire body and the optical system from the ceiling construction. The assembly is available as an accessory that must be ordered separately. With integrated LiveLink WiFi control unit for daylight-dependent control and presence detection as well as WLAN module for secure commissioning and operation (WPA2 encryption). Predefined room configurations (use cases) with all planning-relevant data enable simple and quick commissioning. Control of up to 64 DALI participants. Commissioning is carried out using the LiveLink Install commissioning app for tablet PCs. Surface-mounted luminaire for ceiling mounting. Can also be used as a recessed or suspended luminaire with accessories. With highly efficient CDP microprismatics. With symmetrical, wide-beam light distribution. Rated luminous flux 20,000 lm, rated power 146.00 W, luminaire luminous efficacy 136 lm/W. Light color neutral white, correlated color temperature (CCT) 4000 K, general color rendering index (CRI) Ra > 80 (TLCI >60). Average rated service life L90 (tq 35 °C) = 50,000 h, average rated service life L80 (tq 35 °C) = 100,000 h. The light source is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Luminaire body made of sheet steel, powder-coated white. Surface coated white (RAL 9016). Dimensions (L x W): 1548 mm x 412 mm, luminaire height 97 mm. With front-side knockout openings for heat-resistant through-wiring. Ball-proof in accordance with DIN 18032-3. Permissible ambient temperature (ta): -20 °C - +35 °C. Protection class (EN 61140): I, protection type (DIN EN 60529): IP20, shock resistance level in accordance with IEC 62262: IK08, glow wire test temperature in accordance with IEC 60695-2-11: 650 °C. Weight: 15.0 kg. With 5-pin connection terminal up to 2.5 mm2 for mains connection and mains forwarding. With two electronic control gears, digitally dimmable (DALI). Control gear in accordance with DALI-2 standard (EN 62386). Luminaire can be switched and dimmed using the touch function via DALI control terminals (Touch DIM). The operating device is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). The luminaire can be equipped with the Monitoring ready (MOR) functionality on request. The product meets the basic requirements of the applicable EU directives and the Product Safety Act and bears the CE marking. In addition, the luminaire is ENEC-certified by an independent testing body.