Trilux 7766751 Opendo H2-L PW19 64-840 ETDD +CO2 01 LED ceiling light

Rectangular LED pendant light, direct-indirect beam, with full-surface, rimless PMMA cover. With integrated carbon dioxide sensor for measuring the CO2 concentration in the ambient air and a 3-stage LED traffic light to indicate air quality and the need for ventilation. The measuring ranges of the LED indicators are based on the recommendations of the Federal Environment Agency for reducing the risk of transmission of SARS-CoV-2 indoors through suitable ventilation measures: Green < 800 ppm, yellow 800 - 1400 ppm, red > 1400 ppm CO2 concentration. For single or light strip applications using accessories to be ordered separately. Suitable for through-wiring. With an internal microprismatic cover panel and a smooth, opal PMMA cover on the room side. With symmetrical wide beam light distribution, direct-indirect (70/30%). Glare assessment according to UGR classification (EN 12464-1) < 19. Screen-compatible according to EN 12464-1 due to limited luminance L 3000 cd/m2 for beam angles above 65° all around. Minimum luminaire luminous flux 6400 lm, rated power 54.00 W. Maximum luminaire luminous flux, rated power 0.00 W. Luminaire luminous efficacy 118 lm/W. Light color neutral white, correlated color temperature (CCT) 4000 K, general color rendering index (CRI) Ra > 80. Color location tolerance (initial MacAdam) 3 SDCM, average rated service life L80(tq 25 °C) = 50,000 h. The light source is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Luminaire body made of sheet steel, white powder-coated (RAL 9016). Dimensions (L x W): 1408 mm x 160 mm, luminaire height 47 mm. Protection class (EN 61140): I, protection type (DIN EN 60529): IP20, shock resistance level according to IEC 62262: IK03, test temperature glow wire test according to IEC 60695-2-11: 650 °C. Weight: 5.1 kg. With electronic control gear, digitally dimmable (DALI). Control gear according to DALI-2 standard (EN 62386). Luminaire can be switched and dimmed using a touch function via DALI control terminals (Touch DIM). The control gear is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). The luminaire can be equipped with the Monitoring ready (MOR) functionality on request. The product meets the essential requirements of the applicable EU directives and the Product Safety Act and bears the CE marking.