Trilux 7641851 Publisca P3-AB2L-MLLR/32-68-740 6G1 ETDD LED mast luminaire, anthracite

Decorative side-mounted light with flat cover panel. With intelligent label for quickly calling up light information using a QR code. With connected, 6000 mm long supply cable. With power reduction via control phase. Switching off a control phase causes the luminous flux of the light to be set to 50%. Mast-mounted light for mast spigot Ø 76 mm. The mast is attached using two stainless steel fastening screws in accordance with EN 60598-2-3. Also suitable for mounting on masts with spigot Ø 60 mm using reducers that can be ordered separately. Matching mast on request. Optical system designed in multi-lens technology (MLT). Luminaire optics consisting of highly efficient, UV and temperature-resistant lens systems. With asymmetrical, wide-beam light distribution. Optimized for horizontal alignment of the luminaire body. Other beam characteristics are available for flexible adaptation to customer-specific lighting tasks. The subsequent installation of a rear / side shield is possible as an accessory to be ordered separately. Adjustable luminaire luminous flux (NFC). With 6 LED modules. LED module consisting of four LEDs, including optical system. Rated luminous flux 3200 lm - 6800 lm, rated power 57.00 W - 60.00 W, luminaire luminous efficacy 56 lm/W - 113 lm/W. Light color neutral white, correlated color temperature (CCT) 4000 K, general color rendering index (CRI) Ra > 70. Color location tolerance (initial MacAdam) 5 SDCM. Other LED light colors available on request. Average rated service life LCLO (tq 25 °C) = 100,000 h. The light source is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Luminaire body made of die-cast aluminum. Color anthracite, similar to DB 703. Coating suitable for marine weather on request. Cover plate made of heat-treated toughened safety glass (ESG-H). Cover plate sealed in the luminaire body. With a transmission level of > 98%. Protection class (EN 61140): II, protection type (DIN EN 60529): IP66, impact resistance level according to IEC 62262: IK08. Mast available on request. Wind attack area fw 0.040 m2. Weight: 11.0 kg. Equipment carrier with all electrical components and LED modules mounted as the upper luminaire cover. Removable after loosening four V2A fastening screws. Surge voltage resistance 10 kV. With control gear, digitally dimmable (DALI). Control gear according to DALI-2 standard (EN 62386). The control gear is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Parameterizable ballast with constant luminous flux (CLO). Connected load at end of service life: 60.00 W. The product meets the essential requirements of the applicable EU directives and the Product Safety Act and bears the CE marking. In addition, the luminaire is ENEC-certified by an independent testing body.