Trilux 7813240 LIQ 50N-AB2L-LR 2400-727 4G1 ET LED mast light, anthracite

Next generation LED top-mounted and side-mounted luminaire with clear lines and an attractive silhouette. With intelligent label for quickly calling up luminaire information using a QR code. With power reduction via control phase. Switching off a control phase sets the luminaire's luminous flux to 50%. Top-mounted and side-mounted mounting on or at a mast spigot Ø 76 mm. Tilt angle 0°...90°, adjustable in 5° increments, scaled. Easily and quickly adjustable from top-mounted to side-mounted luminaire using a screw accessible from the outside. Mounting on walls is possible using accessories that must be ordered separately. The mast is attached using two stainless steel fastening screws in accordance with EN 60598-2-3. Also suitable for mounting on masts with spigots Ø 42, 48 and 60 mm using reducers that must be ordered separately. Suitable mast on request. In MLT design (multi-lens technology), consisting of highly efficient, UV and temperature-resistant lens systems in a quadruple arrangement. With asymmetrical, wide-beam light distribution. Other beam characteristics are available for flexible adaptation to customer-specific lighting tasks. The subsequent installation of a rear / side shield is possible as an accessory that must be ordered separately. LED system consisting of 4 MLT LED modules, each with 4 LEDs. Rated luminous flux 2400 lm, rated power 19.00 W, luminaire luminous efficacy 126 lm/W. Light color warm white, correlated color temperature (CCT) 2700 K, general color rendering index (CRI) Ra > 70. Color location tolerance (initial MacAdam) 5 SDCM. Average rated service life Lclo(tq 25 °C) = 100,000 h. The light source is replaceable in accordance with the ecodesign requirements (VO (EU) 2019/2020). The rated luminous flux of the luminaire can be reduced by 50% using an app and NFC (Near Field Communication). 100% of the rated luminous flux is set when delivered. Luminaire body made of die-cast aluminum. Pivot point made of UV and weather-resistant ASA. Luminaire body anthracite powder-coated, similar to DB 703. With metallic effect, highly weather-resistant, powder-coated. Pivot point silver-gray, similar to RAL 9006. The fastening elements are coated in the color of the housing. VG room cover made of die-cast aluminum, which can be opened without tools using a toggle lever lock. The E-block can be removed without tools. The replaceable cover plate made of heat-treated single-pane safety glass is securely attached to the luminaire housing with four stainless steel fastening elements. The cover is equipped with a durable, UV-resistant polyurethane seal. Coating suitable for sea weather on request. Protection class (EN 61140): II, protection type (DIN EN 60529): IP66, shock resistance according to IEC 62262: IK08. Mast available on request. Wind attack area fw 0.110 m2. Weight: 6.9 kg. With connected, 8000 mm long supply cable. With electronic control gear, switchable. Control gear according to DALI-2 standard (EN 62386). The control gear is replaceable in accordance with the ecodesign requirements (VO (EU) 2019/2020). Surge voltage resistance 6/10 KV (differential mode / common mode). Luminaire with adjustable luminaire luminous flux, reduction of up to 50%, using app and NFC (Near Field Communication). Parameterizable ballast with constant luminous flux (CLO). Connected load at end of service life: 20.00 W. The product meets the basic requirements of the applicable EU directives and the Product Safety Act and bears the CE marking. In addition, the luminaire is ENEC-certified by an independent testing body.