Light control device with integrated sensors for presence and daylight-dependent control. With Bluetooth® interface (4.0 LE, range up to 15 m) for parameterizing and controlling the lighting using a smartphone via an app. With DALI interface for controlling up to 20 DALI ballasts (1 output, broadcast). One input enables manual operation using a standard button. The light control is started up automatically after the operating voltage is switched on, even without the basic functionality being configured. Functionally important parameters (run-on time, illuminance) can be set manually on the device. The connection is made using plug-in terminals, a strain relief is integrated in the device body. The scope of delivery includes two IR-impermeable covers to limit the detection area. Presence detection via passive IR elements. Detection range for movement: Ø 6 m at a mounting height of 2.5 m, Ø 10 m at a mounting height of 5 m. Light sensor working range: 20 - 5,000lx (measured at the sensor, V(Lambda)-corrected light sensor element). Function display via LED RGB. Predefined function modes for simplified commissioning, individual adaptability of the function parameters via smartphone with the LiveLink Basic Install app. Supported operating systems (minimum requirement): Android 4.x / iOS 8.4. Housing made of flame-retardant polycarbonate, white. Dimensions: 95 x 81 mm (Ø x H). Installation type: ceiling installation (installation depth min. 55 mm, installation opening Ø 68 - 80 mm). Operating voltage: AC 220 - 240 V. Power consumption: 0.3 W - 1.8 W. Permissible ambient temperature (ta): 0°C - +55°C. Protection class (EN 61140): II, protection type (DIN EN 60529): IP20. Ceiling mounting option with LiveLink Basic ZDDS surface-mounted housing to be ordered separately.
