Trilux 7524662 ArimoFit Act M48 PW19 53-8 ETDD8 LED recessed luminaire, white

Rectangular LED recessed light with microprismatic cover PW. Version M48 (300 mm x 1500 mm). Light with Active equipment for controlling the light color using a separate control unit. The light can optionally be equipped with an emergency lighting system for ceiling installation with an emergency lighting operating time of 3 hours. In emergency lighting mode, the luminous flux of the light is 500 lm. Creation of a deeper spatial effect. LED recessed light for system ceilings with visible support rails. The light body is flush with the ceiling system on the room side. The optical system consists of a highly efficient PMMA cover with microprismatics. PW (prismatic wide). The microstructured PMMA prism surface of the optical system has an anti-glare effect, is non-yellowing and does not cloud. With deep-wide beam light intensity distribution. Glare rating according to UGR classification (EN 12464-1) < 19. Suitable for screens in accordance with EN 12464-1 due to limited luminance L 3000 cd/m2 for beam angles above 65° all around. Harmonious lighting effect due to evenly illuminated light emission. Individual design of the light emission surface (e.g. by printing) and other special solutions available on request. LED panels equipped with LEDs in warm white and daylight white light colors. The following information on the luminaire luminous flux and the system connection power refer to the operation of this luminaire with dynamically adjustable light color (HCL) in warm white light color operating mode (2700 K). Rated luminous flux 5300 lm, rated power 50.00 W, luminaire luminous efficacy 106 lm/W. Light color variable (warm white - daylight white), correlated color temperature (CCT) variable (2700 K - 6000 K), general color rendering index (CRI) Ra > 80. Color location tolerance (initial MacAdam) 3 SDCM, average rated service life L80(tq 25 °C) = 100,000 h, average rated service life L90(tq 25 °C) = 50,000 h. Luminaire body made of extruded aluminum profile. Surface coated white (RAL 9016). Weight: 4.5 kg. The narrow flank profile is flush with the mounting rail. The luminaire frame is profiled in 3 dimensions to create a depth effect in the ceiling. Luminaire can be covered with insulation material at ta 25 °C, can also be used at ta35 °C without insulation material. Protection class (EN 61140): I, protection type (DIN EN 60529): IP20, protection type on the room side: IP40, shock resistance level according to IEC 62262: IK02, test temperature glow wire test according to IEC 60695-2-11: 650 °C. Reverse polarity protected quick connection with mains transmission up to Ø 2.5 mm2. Connection of the ballast to the luminaire using a plug connection (plug and play). The packaging concept of the luminaire enables the operating device to be removed separately for pre-assembly, the other components of the luminaire remain protected until final assembly. With external, electronic operating device for switching, dimming and controlling the light color using a DALI Device Type 8 capable control device. Operating device according to DALI-2 standard (EN 62386). Operating device is idle-proof and protected against incorrect connection, short circuit, overload and overtemperature. The operating device is replaceable. Output ripple of the operating device 4% for effective control of the LED system and flicker-free light. The product meets the basic requirements of the applicable EU directives and the product safety law and bears the CE marking. The luminaire is part of a range of recessed, surface-mounted and suspended luminaires that are coordinated in appearance. The variety of applications of the product range is further underlined by variants in the area of luminous flux packages, light distribution curves and protection classes. On request, the basic range can be expanded to include project-specific luminaire features.