Trilux 7915759 Cultega Act T COM PAW 600 ETDI 05 LED table lamp, grey

Compact table lamp with a flat, round lamp head, three adjustment joints and base. Lamp with Active equipment for controlling the light color using a separate control unit. Lamp with Active equipment for optional, automatic control of the light color. The lamp is controlled via the controls on the lamp head. Suitable for illuminating an RF3 area according to DIN 5035-8 with up to 500lx without additional lighting. In conjunction with general lighting (500lx), modified illuminance levels according to DIN EN 12464-1:2021 of up to 1000lx are achieved on the RF3 area for office-specific visual tasks. With base plate for setting up on a flat surface. The base plate is fully lined with felt to protect the base. The vertical joint on the lamp base enables the lamp head to be rotated by 120°. With prismatic cover for optimal light distribution. With direct, asymmetrical wide-beam light distribution. Glare rating according to UGR classification (EN 12464-1) < 16. The following information on the luminaire luminous flux and the system connected load refers to the operation of this luminaire with dynamically adjustable light color (HCL) in the warm white light color operating mode (2700 K). Rated luminous flux 650 lm, rated power 8.50 W, luminaire luminous efficacy 76 lm/W. Light color variable (warm white - daylight white), correlated color temperature (CCT) variable (2700 K - 6000 K), general color rendering index (CRI) Ra > 90. Color location tolerance (initial MacAdam) 3 SDCM, average rated service life L80(tq 25 °C) = 50,000 h. The light source is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Die-cast aluminum lamp body. Fine-structure powder-coated surface, color black. (RAL 9005). Base plate dimensions: Ø 190 mm x 10 mm. Lamp head dimensions Ø 134 mm x 23 mm, lamp height (infinitely adjustable) 390 mm - 715 mm. Protection class (EN 61140): II, protection type (DIN EN 60529): IP20, shock resistance level according to IEC 62262: IK02, glow wire test temperature according to IEC 60695-2-11: 650 °C. Weight: 2.8 kg. The plug-in power supply (Euro connector type C, EN 50075) is equipped with a connecting cable and coupling for connection to the lamp cable. The cable is routed completely inside the lamp body, the connecting cable is securely connected using a plastic clamp. The connection cable (1500 mm) on the back is connected to the connection cable of the power supply unit (1500 mm) using a plug connection. The total cable length of the connection is 3000 mm. With electronic control gear, dimmable (integrated). The control gear is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). With integrated control unit for controlling the light color depending on the day and time of year (circadian control). Operation via 2 buttons (on/off/brightness/light color/HCL curve). With status LED to display the operating mode. The product meets the basic requirements of the applicable EU directives and the product safety law and bears the CE marking.