Trilux 7916059 Cultega T COM PAW 600-940 ETDI KL 01 LED table lamp, white

Compact table lamp with a flat, round lamp head, three adjustment joints and fastening clamp. The lamp is controlled via the controls on the lamp head. Suitable for illuminating an RF3 area according to DIN 5035-8 with up to 500lx without additional lighting. In conjunction with general lighting (500lx), modified illuminance levels according to DIN EN 12464-1:2021 of up to 1000lx are achieved on the RF3 area for office-specific visual tasks. With table clamp for attaching the lamp to the edge of a solid, load-bearing surface with a material thickness of 20 mm - 75 mm and a clamping depth of approx. 100 mm. The lamp can be rotated 180 °. The surface of the fastening area is protected by a rubber buffer. With prismatic cover for optimal light distribution. With direct, asymmetrical wide-beam light distribution. Glare rating according to UGR classification (EN 12464-1) < 16. Rated luminous flux 700 lm, rated power 7.70 W, luminaire luminous efficacy 90 lm/W. Light color neutral white, correlated color temperature (CCT) 4000 K, general color rendering index (CRI) Ra > 90. Color location tolerance (initial MacAdam) 3 SDCM, average rated service life L80(tq 25 °C) = 50,000 h. The light source is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Luminaire body made of die-cast aluminum. Surface fine-structure powder-coated, color white. (RAL 9016). Dimensions of luminaire head Ø 134 mm x 23 mm, luminaire height (continuously adjustable) 390 mm - 715 mm. Protection class (EN 61140): II, protection type (DIN EN 60529): IP20, shock resistance according to IEC 62262: IK02, test temperature glow wire test according to IEC 60695-2-11: 650 °C. Weight: 1.4 kg. The plug-in power supply unit (Euro connector type C, EN 50075) is equipped with a connecting cable and coupling for connection to the luminaire cable. The cable is routed completely inside the luminaire body, the connecting cable is securely connected using a plastic clamp. The connecting cable (1500 mm) on the back is connected to the connecting cable of the power supply unit (1500 mm) using a plug connection. The total cable length of the connection is 3000 mm. With electronic control gear, dimmable (integrated). The control gear is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Operation via 2 buttons (on/off/brightness). The product meets the basic requirements of the applicable EU directives and the product safety law and bears the CE marking.