Energy efficiency class of the permanently installed light sourceOther
HABSFlow-Act D2-L MRW 4000 ETDD8 01
HAN7919462
GTIN4018242645435
Covering the luminaire with thermal insulation material possibleYes
Connection typePlug-in terminal
Execution of the gridWhite
Beam angleWide beam 41-80°
Rated luminous flux according to IEC 62722-2-14200lm
Rated ambient temperature according to IEC62722-2-1-20 to 25 °C
Operating deviceElectronic transformer
Suitable for computer workstations according to EN 12464-1No
Width84 mm
Dimming 0-10 VNo
Dimming 1-10 VNo
Dimming DALIYes
Dimming DMXNo
Dimming DSINo
Dimming GPRSNo
Dimming LineSwitchNo
Dimming mains voltage modulationNo
Dimming trailing edgeNo
Dimming phase controlNo
Dimming potentiometer (integrated)No
Dimming RFNo
Dimming Sine Wave ReductionNo
Dimming Touch and DimNo
Dimming ZigbeeNo
Dimming depends on the control gearYes
Dimming manufacturer-specificNo
Dimming with push buttonNo
Dimming programmableNo
Color temperature4000K
Color rendering index CRI80-89
VersionOther
Suitable for surface mountingNo
Suitable for ceiling mountingNo
Suitable for flush mountingYes
Suitable for number of lamps1
Suitable for light strip configurationYes
Suitable for emergency lightingNo
Suitable for pendulum suspensionNo
Suitable for wall mountingNo
Housing colorWhite
Glow wire test according to IEC 60695-2-11650 °C - 30 s
Height/Depth45 mm
Power factor0.95
Luminaire with limited surface temperature D-markNo
Luminaire luminous efficacy131lm/W
LampsLED replaceable
Light emissionDirect
Light colorWhite
Light distributorOther
Light distributionSymmetrical
Length1413 mm
Max. system performance32W
With operating deviceYes
With motion detectorNo
With light sourceYes
With light sensorNo
With air slotsNo
Nominal voltage220 to 240 V
Without dimming functionNo
Number of poles5
Impact resistanceIK03
IP protection)IP20
Protection class (NEMA)Other
Protection classI
Voltage typeAC
Housing materialSteel