Trilux 9002209241 Jovie70-AM3L12S2-150-730-ET-FBD-26 LED mast light

Versatile outdoor mast light in a reduced, international design language and flat construction. With intelligent label for quickly accessing luminaire information using a QR code. Large version, length of luminaire head 680 mm. In combination with the mast attachment (ordered separately), can be used as a mast-top luminaire (spike size Ø 76 mm / Ø 60 mm, Jovie Z MB D...) or mast-mounted luminaire (spike size Ø 42 mm / Ø 60 mm, Jovie AZ MB D...). The inclination of the luminaire head can be adjusted in 4 ways. (0° / 5° / 10° / 15°). In MLT version (multi-lens technology), consisting of highly efficient, UV and temperature-resistant lens systems in a quadruple arrangement. Asymmetrical medium-wide beam light distribution for area lighting, e.g. parking spaces and storage areas. Front beam 35°. Additional beam characteristics are available for flexible adaptation to customer-specific lighting tasks. The light source can be replaced by qualified personnel. The LED system consists of MLT LED modules, each with 4 LEDs. Number of modules: 12. Rated luminous flux 15,000 lm, rated power 140.0 W, luminaire luminous efficacy 107 lm/W. Power factor 0.95. Efficiency version with material-optimized LED number. General color rendering index (CRI) > 70, correlated color temperature (CCT) 3000 K. Other LED light colors available on request. Average rated service life LCLO (tq 25 °C) 100,000. The light source is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Luminaire body made of die-cast aluminum. Color DB703 anthracite. Coating suitable for marine weather on request. With PMMA cover screen, printed. Cover screen can be individually printed on customer request. Visible label behind the cover screen, protected against the effects of weather, on request. Protection class (EN 61140): 02, protection type (DIN EN 60529): 66, impact resistance level according to IEC 62262: IK08. Mast available on request. Wind attack area Fw (m²) = 0. Weight: 9.1 kg. The luminaire is connected without opening the luminaire body using the connecting cable that runs out the outside. The control gear can be replaced by qualified personnel. With UV-resistant silicone connecting cable for laying cables outdoors, e.g. when mounting on trusses. Length of connecting cable: 14 m. With electronic control gear and SLR equipment (Smart Lighting Ready) for the subsequent integration of components for lighting management systems. Standardized bases according to Zhaga are attached to the top of the luminaire head and to the lower cover. Configurable ballast with constant luminous flux (CLO). Connected load at end of service life: 147.00 W. Control gear in accordance with DALI-2 standard (EN 62386). The control gear is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). The luminaire meets the requirements of the applicable EU directives and the product safety law (CE marking). In addition, it is ENEC-certified by an independent testing body. Surge voltage resistance differential mode / common mode: 6 kV / 10 kV. The luminaire meets the requirements of EN 60598 and is designed for exposure to wind in accordance with EN 1991 (Eurocode) with a base wind speed of up to 30 m/s (corresponds to wind zone 4 in Germany) in terrain category 1. This takes into account a snow load (up to 1 kN/m²) and icing (up to 2 cm) at a light point height in accordance with the installation instructions. Exposed locations (e.g. bridges, installation on buildings or directly next to railway tracks) are not taken into account. Impact loads are not taken into account.