Trilux 7009551 Parelia HL 13000 840 ETDD +LLWS 03 LED pendant light, silver

Exclusive LED pendant light with direct and indirect luminous flux and a light line visible from the side. For use as a single light or as a starting light in a light strip, the end piece is included in the scope of delivery. Cable suspension already included in the scope of delivery. For suspended installation as a single or light strip light. Cable suspension already included in the scope of delivery (2000 mm). Standard pendant length: 1000 mm. In addition to the usual installation parallel to the window front, the light can also be planned and installed parallel to the building axis of the building. With internal, highly efficient micro-prismatic CDP-I. Clear cover panel with lateral light emission edge. With symmetrical wide beam light distribution, direct-indirect. Glare rating according to UGR classification (EN 12464-1) < 19. Suitable for computer workstations in accordance with EN 12464-1 The lateral arrangement of the light modules virtually eliminates reflections on shiny surfaces. Rated luminous flux 13700 lm, rated power 81.00 W, luminaire luminous efficacy 169 lm/W. Light color neutral white, correlated color temperature (CCT) 4000 K, general color rendering index (CRI) Ra > 80. Color location tolerance (initial MacAdam) 3 SDCM, average rated service life L80 (tq 25 °C) = 50,000 h. The light source is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Luminaire body made of sheet steel. Head pieces made of PC. Surface coated silver gray (RAL 9006). Dimensions (L x W): 2107.5 mm x 102 mm, luminaire height 37 mm. Protection class (EN 61140): I, protection type (DIN EN 60529): IP20, shock resistance according to IEC 62262: IK02, test temperature glow wire test according to IEC 60695-2-11: 650 °C. Weight: 6.7 kg. Transparent connection cable included in delivery (1000 mm). With two electronic control gear, digitally dimmable (DALI). Luminaire can be switched and dimmed using a button function via DALI control terminals (Touch DIM). The control gear is replaceable in accordance with the ecodesign requirements (VO (EU) 2019/2020). With integrated LiveLink Sensor IR Micro for connection to a LiveLink control unit for daylight-dependent control and presence detection. Connection and electrical supply via the DALI interface of the LiveLink control unit Occupies 2 DALI participants. Constant light control with switch-off function when there is sufficient daylight. Passive infrared presence sensor, with highly sensitive multi-segment pyro sensors, with adjustable switch-off delay time, optionally in automatic mode (automatic on, automatic off) or semi-automatic mode (automatic off, manual on). Special IQ mode for automatic adjustment of the follow-up time to the room usage. Temperature range -25 °C - +55 °C. Integrated pyro sensor for the highest detection quality with 168 detection zones. A presence area of 16 m2 enables the detection of the smallest movements. Square detection, presence detection squares max. 4 mx 4 m (16 m2) / radial max. 4 mx 4 m (16 m2) / tangential max. 6 mx 6 m (36 m2) with a recommended mounting height of 2.8 m, permissible mounting height 2.5 m to 4 m. The product meets the basic requirements of the applicable EU directives and the Product Safety Act and bears the CE marking. In addition, the luminaire is ENEC-certified by an independent testing body.