Corrosion-protected mounting rail made of profiled, hot-dip galvanized sheet steel with zinc-magnesium coating and polyester resin paint in silver. 11 conductors embedded in an integrated current-conducting profile. 5 power cables (5 x 2.5mm / 16A) and 2 x 2 conductors (4 x 1.5mm / 10A) for the integration of emergency lighting using two independently separated circuits and 2 conductors (2 x 1.5mm / 10A) as control cables. Electrical tapping is possible without restriction over the entire length of the light strip. Pre-assembled connector enables tool-free electrical and mechanical mounting rail connection as well as stepless power tapping in the joint area between two mounting rails. Tool-free connection via electrical feed-in set. Note: If used in chemically contaminated ambient atmospheres, high or condensed humidity, please consult your consultant. Dimensions: 2500 x 60 x 54 mm, weight: 4.5 kg