LED safety light for escape route lighting when wall-mounted with min. 1 lux in accordance with EN 1838, room height 2.2 to 8 m, 2 high power LEDs, neutral white 4,000 K, lens made of polycarbonate (PC), optimal thermal management using a cooling plate, recessed wall light for 68 mm wall cutout and wall thicknesses of 1-25 mm, tool-free quick installation of the light using specially shaped retaining springs, tool-free replacement of battery and operating device, cover ring made of die-cast aluminum, powder-coated, housing color white (similar to RAL9016), device box for ceiling installation made of polypropylene (PP), light with individual battery supply for 3 hours of emergency lighting operation in permanent or standby mode, automatic test (autotest) by the light, optional central monitoring via DALI, display of the light status via status LED, NFC interface for addressing, configuration and maintenance using PROset Pen (item no.: 22170290) or PROset App, Addressing also possible optically or via EZ addressing, permanent and standby mode: +5°C to +35°C, power supply: 220-240 V AC (+/- 10%), 50-60 Hz, light output: 4.7 W (with battery quick charge in permanent mode), typical connected load (without battery charge): 3.2 W in permanent mode / 1.1 W in standby mode, standby and permanent mode can be set via jumper and NFC interface, IP20, SC1, light wired halogen-free and silicone-free, ball-proof, plug-in terminals for through-wiring up to 2.5 mm, impact resistance: IK04, dimensions: diameter 85 x 4 mm, weight: 0.38 kg, light with D mark (for use in an environment in which unusual dust deposits are not expected), robust, integrated battery with 3-year guarantee. Valid according to the terms of the manufacturer's warranty, available at https://www.zumtobel.com/media/downloads/Garantiebedingungen_DE.pdf, battery warranty void if installation is not carried out until three (3) months after delivery EXW (Incoterms 2010)
