The multimeter is equipped with a digital display. It has a continuity test and a diode test. It can measure frequencies and capacitance. The maximum voltage measuring range for alternating current is 1000V and for direct current also 1000V. The maximum current measuring range for alternating current is 10A and for direct current also 10A. The maximum resistance measuring range is 500MOhm. The multimeter has a measured value memory and a continuity test. It can measure the true effective value (TRMS) and has an IR interface. The smallest resolution for frequency measurement is 0.001 Hz, for direct voltage 0.001 mV, for direct current 0.01 µA, for voltage (AC/DC) 0.001 mV, for current (AC/DC) 0.01 µA, for temperature 0.1 °C, for alternating voltage 0.001 mV, for alternating current 0.01 µA and for resistance 0.001 Ohm. The multimeter can also measure conductivity. The maximum frequency measurement range is 999.99kHz and the maximum capacitance measurement range is 100000µF. The maximum voltage measurement range for the measuring circuit category is 600V and for AC/DC 1000V. The maximum current measurement range for AC/DC is 10A and the maximum temperature measurement range is 1350°C. The multimeter has a maximum value memory, multiple display, manual/automatic range selection, measuring circuit category CAT IV and measures according to the principle of true RMS. It also has a minimum value memory, screen backlight, level measurement (dB), instantaneous value memory (data hold), relative value measurement, interface and peak value memory. The multimeter is battery operated and can perform duty cycle measurements. It can also measure temperature, including temperature measurement with TC.
