Catalog

Cimco 112515 15mm combination spanner

In stock
SKU: 655119
€19.24
Into a basketIn the basketGo

Overview

Ratchet ring and open-end wrenches for ratcheting loosening or quick tightening of screws and nuts in one go without setting with the ring ratchet. On one side an open-end or open-end wrench with 15 degree offset, on the other side a ring wrench of the same width with built-in ratchet mechanism with special advantages: Ratchet with fine teeth: 72 teeth = only 5 degrees minimum swivel angle. Left and right rotation is achieved by simply turning the wrench and not by means of an annoying switch lever that often gets moved unintentionally. Despite the ratchet, the wrenches are very narrow. This makes the tools particularly suitable for use in confined spaces. 12-edge ring with flank drive, ie the drive is no longer via the screw head corners, but on the flanks, which means that a much higher power transmission is achieved and the edges of screw heads and nuts are protected. Made of chrome-vanadium steel, drop-forged, specially hardened, highly polished, nickel-plated and hard chrome-plated. Very high torque transmission, exceeds DIN requirements. 15mm

PropertyValue
Design low-sparking:no
Suitable for toggle pin:no
Cranked:yes
Head width, jaw side:32 mm
Head width, ring side:28.5 mm
Head height, jaw side:11.5 mm
Head height, ring side:7.4 mm
Length:200 mm
With toggle pin:no
Wrench size Jaw side:15 mm
Wrench size ring side:15 mm
Protective insulation 1000 V:no
Ratchet design:yes
Number of corners:12

Characteristics

Low-spark versionNo
HAB112515 15mm
ManufacturerCimco
HAN112515
GTIN4021103125151
Length200 mm
Protectively insulated 1000 VNo
Cimco 112515 15mm combination spanner
Cimco 112515 15mm combination spanner
€19.24
Into a basketIn the basketGo
Delivery in Europe
We will deliver your order to all European cities.
In cash, by bank card or online
We are located
8200-121 Albufeira.R. Dr. Diogo Leote 35.
24 hours
We will send the order within 24 hours.
HomeCatalogSearchProfile0Cart