Cimco 172004 with 23 tools apprentice case

Robust hard-shell tool case for professional use in an attractive two-tone design with two interchangeable tilt locks. Two reinforced metal folding hinges serve as lid holders. The opening angle is greater than 90 degrees. Equipped with 2 tool panels made of lightweight plastic with numerous sewn-on pockets for holding hand tools, a spacious document compartment is integrated into the upper tool panel. The base tray with three separations offers space for storing measuring tools, small parts, tools, etc., size: L x W x H: 340 x 430 x 160 mm, weight: empty 3,000 g, equipped 6,250 g. Includes 23 quality tools. Tool case contents: 1 x 1000 V straight telephone pliers, 200 mm (10 0216), 1 x 1000 V side cutters, 160 mm (10 0574), 1 x cable shears DUOCUT, 160 mm (12 0108), 1 x JOKARI wire stripping pliers SUPER 4 PLUS (10 0780), 1 x JOKARI cable knife without blade (12 1014), 1 x voltage tester, 2-pole (11 1442), 1 x JOKARI inner box stripper, 8 - 13 mm ø (12 2027), 1 x plaster mold made of soft rubber, 120 mm ø (14 0306), 1 x pocket saw PUK, span 150 mm (12 0502), 1 x 1000 V safety cable knife (12 1042), 1 x engineer's hammer, in accordance with DIN 1041/1193, 300 g (13 0804), 1 x painter's spatula, 40 mm (14 0310), 1 x water brush, ø 24 mm (14 0310), 1 x wooden folding rule, 2 m (21 0004), 1 x carpenter's pencil, HB lead, 240 mm (21 2170), 1 x VDE slotted screwdriver 3.0 x 0.5 x 100 mm (11 7702), 1 x VDE slotted screwdriver 4.0 x 0.8 x 100 mm (11 7704), 1 x VDE slotted screwdriver 5.5 x 1, 0 x 125 mm (11 7705), 1 x VDE Phillips screwdriver PH 1 x 80 mm (11 7731), 1 x VDE Phillips screwdriver PH 2 x 100 mm (11 7732), 1 x VDE Phillips screwdriver PZ 1 x 80 mm (11 7741), 1 x VDE Phillips screwdriver PZ 2 x 100 mm (11 7742), 1 x control cabinet spirit level, 230 mm (21 1540)