![CDATA[The DALI blind module is used to control 230V blind motors via DALI. 4 processes for opening/closing the blind and for adjusting the slat tilt angle can be programmed. Versions for ceiling installation and top hat rail installation are available. Technical data: Color: gray Ambient temperature: -20 to +60 degrees Celsius Protection class: IP20 Connecting wire cross-section: max. 2.5mm² Installation: top hat rail/ceiling installation (depending on version) Function: Device type: DALI switching actuator configurable via DALI cockpit: yes Electrical data: Supply from: DALI bus type. Current consumption: 5.5mA (DALI) Control input: DALI Input: 230V AC Output: 230V AC (Up or Down, interlocked) Relay contact Switching voltage: 250V AC Max. rated load and rated current: 1000VA / 4A Switching cycles at rated load - resistive: >, 10^5 Max. switching frequency: 0.2Hz Dimensions: Length: 98mm (HS) / 120mm (DE) Width: 17.5mm (HS) / 30mm (DE) Height: 56mm (HS) / 21mm (DE)]]>
