![CDATA[Schneider Electric KNX. For switching and dimming dimmable LED lamps, incandescent lamps, HV halogen lamps, LV halogen lamps via dimmable wound transformers or electronic transformers or dimmable compact fluorescent lamps. (Leading and trailing edge). With integrated bus coupler, screw terminals, short-circuit, open-circuit and overtemperature protection, lamp-friendly soft start. The connection of different external conductors is permitted. The dimming actuator automatically detects the connected load. This takes place in the background when switched on. Combinations of ohmic and inductive or ohmic and capacitive loads can also be connected. Combinations of inductive and capacitive loads must not be connected. No flickering of LEDs when switched off. For mounting on TH35 top hat rails in accordance with EN 60715. The bus connection is made via a bus connection terminal. Rated voltage AC 220 - 230 V, 50/60 Hz, channels 4 (different phases possible).]]>
