![CDATA[Pure linear regulator. - the LED current can be dimmed linearly (AM) from 100 to 15 - suitable for use with Dim2Warm - IP20 independent driver for indoor use - protection class II against electric shock for direct or indirect contact. - Driver for built-in use (DC MINIJOLLY DALI BI) - for lighting devices of protection class 1 and 2 - active power factor corrector - analogue input (NTC) for connecting the heat sensor - current regulation ± 5% including temperature fluctuations - input and output terminal blocks on the same side (conductor cross-section up to 1.5 mm2 / AWG15) - clamping screws on primary/secondary circuits for cables with diameter: PRI 5-8 mm / SEC 3-5 mm Protection measures: against overheating and short circuits, against mains voltage peaks, against overload, thermal protection = C.5.a Technical data Nominal voltage: 220 to 240 V Frequency: 50/60 Hz Dimensions WxHxD: 110 x 22 x 50 mm Temperature range: -25 to 45°C For further technical data see manufacturer's data sheet.]]>
