![CDATA[1-way switching actuator with three binary inputs for installation in a 60 mm flush-mounted box. Potential-free contacts can be connected to the three inputs. An NTC temperature sensor can optionally be connected to the third input. The inputs and the KNX are connected via a 6-core, approx. 30 cm long connecting cable. The connecting cable for the inputs can be extended to a maximum of 10 m. KNX Secure compatible. KNX software functions: Switch actuator functions: Operation as a normally closed or normally closed contact. Selection of the basic position in the event of bus voltage failure/return. Switch-on and/or switch-off delay. Time switch function. Switching. Status feedback. Locking function or forced operation. Scene function (64). Feedback object can be inverted. Input functions: Free assignment of the switching, dimming, blind and value transmitter functions. Locking object. Behavior when bus voltage returns. Temperature, brightness, color temperature. Switching: two switching objects per input.]]>
