![CDATA[The eNet wireless energy sensors enable the wireless transmission of voltage, current and energy values to the eNet server. Recording of current and voltage of the connected consumer. Calculating the active power, reactive power, apparent power and active electrical energy. Event- or time-controlled sending of measured value telegrams to the eNet server. Synchronization of the time with the eNet server. Technical specifications: Nominal voltage: AC 230 V, 50/60 Hz Ambient temperature: -5 °C to +45 °C Current: 0 mA to 16 A Electrical power: 0 to 3680 W Energy consumption: 0 to 99999 kWh Radio frequency: 868.3 MHz Range (free field): approx. 100 m Nominal load current: 16 A Connection cross-section: max. 4 mm² Length of the data cable: max. 3 m Notes An eNet server is required to operate this DIN rail mounted device.]]>
