![CDATA[Binary input 4-way, flush-mounted, KNX. 4 binary inputs flush-mounted (button interface) for connecting commercially available buttons, switches or potential-free contacts. The query voltage is provided by the binary input. The device converts the switching information into commands on the KNX bus. The binary input is flush-mounted in a 60 mm device box. Functions of the application software: Switching ON/OFF (also sends with a time delay and periodic sending), dimming (1- and 2-button dimming), UP/DOWN (1- and 2-button operation, also travel as long as pressed), value transmitter for temperature, brightness, dimming value in %, alarm input with periodic sending and edge selection, two-channel mode per input for switching and value call functions. Function 1 via short button press, function 2 via long button press. Setpoint selection for heating function, blocking function, forced control, timer call, scene call with button (1 scene) or switch (2 scenes).]]>
