BUSCH-JAEGER USB-M-1.11 USB interface f@h | Standard

![CDATA[Enables the connection of a Busch-free@home® system to a higher-level Busch-free@home® system. For the use of up to 4 centrally installed weather stations in a maximum of 16 subordinate Busch-free@home® systems. The bus connection to the higher-level Busch-free@home® system is made via the enclosed bus terminal. The connection to the local Busch-free@home® system is made via the USB-B socket. System requirement: Busch-free@home® system with System Accesspoint SAP/S.13 with firmware V2.6.0 or higher. Programming only when the bus voltage is applied via the web interface of the System Access Point. Further information on commissioning and operation can be found in the system manual and the online operating instructions in the current online catalog.]]>