![CDATA[Schneider Electric KNX. The KNX meter interface Modbus REG-K is a gateway between a Modbus installation and the KNX bus. The device transmits measured power and consumption values from connected Modbus energy meters to the KNX bus. This data from the energy meters can be used for evaluation, visualization or to reduce energy consumption in your KNX installation. Up to 10 Modbus meters with RTU transmission protocol can be connected to the gateway in parallel. These meters send data to the KNX via the gateway. The gateway always works in master mode, the connected Modbus devices work in slave mode. Communication from KNX to the Modbus is not possible. The ETS application has pre-programmed templates for 17 different Schneider Electric models of Modbus meters. Each connected Modbus meter can be assigned a corresponding template in the ETS.]]>
